Route1® FIPS Cryptographic Module Security Policy Version 2.1.0.3 July 10, 2008 Strong encryption technology for software developers Contact Information Route1 Inc., 155 University Avenue, Suite 1920 Toronto, Ontario M5H 3B7 Canada Telephone: 416-848-8391 Fax: 416-848-8394 Email: sales@route1.com Trademarks BSAFE, RC2, RC4, RC5, and RSA are either registered trademarks or trademarks of RSA Security Inc. in the United States and/or other countries. Route1, the Route1 Logo, Route1 MobiKEY, and Route1 MobiNET are either registered trademarks or trademarks of Route1 Inc. in the United States and/or Canada and/or other countries. All other goods and/or services mentioned are trademarks of their respective companies. Distribution This document may be freely reproduced and distributed whole and intact including this Copyright Notice. © 2008 Route1 Inc. All rights reserved. Published July 11, 2008 Table of Contents Table of Contents...................................................................................................................................................iii 1 Introduction .......................................................................................................................................................5 2 References...........................................................................................................................................................5 3 Document Organization ..................................................................................................................................5 4 Route1 FIPS Cryptographic Module .............................................................................................................6 4.1 Introduction...............................................................................................................................................6 4.2 Cryptographic Module ............................................................................................................................7 4.3 Module Interfaces .....................................................................................................................................8 4.4 Roles and Services ....................................................................................................................................8 4.4.1 Officer Role ..................................................................................................................................8 4.4.2 User Role ......................................................................................................................................8 4.5 Cryptographic Key Management...........................................................................................................9 4.5.1 Key Generation............................................................................................................................9 4.5.2 Key Storage ..................................................................................................................................9 4.5.3 Key Access ...................................................................................................................................9 4.5.4 Key Protection/Zeroization......................................................................................................10 4.6 Cryptographic Algorithms....................................................................................................................10 4.7 Self-Test....................................................................................................................................................11 4.7.1 Power-Up Self-Tests .................................................................................................................11 4.7.2 Conditional Self-Tests ..............................................................................................................12 4.7.3 Critical Functions Test..............................................................................................................12 4.7.4 Mitigation of Other Attacks.....................................................................................................12 5 Secure Operation of the Cryptographic Module.......................................................................................13 5.1 Approved DSA and RSA Modulus Sizes ............................................................................................13 5.2 Modes of Operation................................................................................................................................13 5.3 Operating the Cryptographic Module.................................................................................................14 5.4 Startup Self Tests ....................................................................................................................................15 5.5 Random Number Generator .................................................................................................................15 6 Services .............................................................................................................................................................16 7 Acronyms and Definitions ............................................................................................................................23 iii Introduction This page is intentionally blank. iv Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Introduction 1 Introduction This is a non-proprietary Route1TM FIPS Cryptographic Module security policy. This security policy describes how the Cryptographic Module meets the security requirements of FIPS 140-2, and how to securely operate the Cryptographic Module in a FIPS-compliant manner. This policy was prepared as part of the FIPS 140-2 Level 1 validation of the Cryptographic Module. FIPS 140-2 (Federal Information Processing Standards Publication 140-2 -- Security Requirements for Cryptographic Modules) details the United States Government requirements for cryptographic modules. More information about the FIPS 140-2 standard and validation program is available on the NIST Web site at http://csrc.nist.gov/cryptval/. 2 References This document deals only with operations and capabilities of the Route1 FIPS Cryptographic Module in the technical terms of a FIPS 140-2 cryptographic module security policy. More information is available on the Cryptographic Module from the following resources: · The Route1 Web site contains information on their full line of products and services at http://www.route1.com/. · An overview of the RSA BSAFETM Crypto-C Micro Edition module, from which this cryptographic module is derived, is located at http://www.rsa.com/node.asp?id=1204. · For answers to technical or sales related questions please refer to the "Contact Us" link at http://www.route1.com/. 3 Document Organization This document explains the Cryptographic Module's FIPS 140-2 relevant features and functionality. This section, Introduction, provides an overview and introduction to the Security Policy. Route1 FIPS Cryptographic Module on page 6 describes the Cryptographic Module and how it meets FIPS 140-2 requirements. Secure Operation of the Cryptographic Module on page 13 specifically addresses the required configuration for the FIPS mode of operation. Services on page 16 lists all of the functions by the Cryptographic Module. Acronyms and Definitions on page 23 lists the definitions for the acronyms used in this document. 5 Route1 FIPS Cryptographic Module 4 Route1 FIPS Cryptographic Module This section provides an overview of the Route1 FIPS Cryptographic Module. The following topics are discussed: · Introduction · Cryptographic Module · Module Interfaces · Roles and Services · Cryptographic Key Management · Cryptographic Algorithms · Self-Test. 4.1 Introduction Route1 is the trusted provider of security and identity management solutions that are redefining today's digital landscape. The Route1 FIPS Cryptographic Module is a software development toolkit that enables developers to incorporate cryptographic technologies into security-cognizant applications, devices and systems. Cryptographic technologies are at the core of Route1's MobiNETTM, a communications and service delivery platform focused on identity management and entitlement-based access to systems and resources. MobiNETTM services are delivered on a number of digital form factors, such as mobile phones, handheld devices and Route1 MobiKEY® ­ an ultra-portable, smart-card enabled USB device. Route1 MobiKEY® is one of the most powerful and easy-to-use secure computing solutions available today Route1 MobiNET® provides organizations with the facility to: · Expand and manage electronic services through a single identity and entitlement management platform. · Secure distribution of multimedia content to wired and wireless networks. · Enhance and secure collaboration. · Assure the integrity of commercial and financial transactions. · Consistently and accurately identify and manage individuals or entities accessing computing resources. · Customize entitlements to computing resources based on the individual, context and business rules. · Enable highly secure remote access to desktops, applications and systems. 6 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Route1 FIPS Cryptographic Module · Implement licensed content protection, digital rights management and content distribution. · Secure all forms of integrated communications including VoIP and email. · Provide a defense against identity theft, phishing and pharming attacks, and unauthorized website access. The features of the Cryptographic Module include the ability to optimize code for different processors and specific speed or size requirements. Assembly-level optimizations on key processors mean Cryptographic Module algorithms can be used at increased speeds on many wireless platforms. Also, the Cryptographic Module has received FIPS 140-2 validation and offers a full set of cryptographic algorithms including public-key (asymmetric) algorithms, symmetric (secret key) block and stream ciphers, message digests, message authentication, and Pseudo Random Number Generator (PRNG) support. Developers can implement the full suite of algorithms through a single Application Programming Interface (API) or select a specific set of algorithms to reduce code size or meet performance requirements. Note: When operating in a FIPS-approved manner, the set of algorithm implementations is not customizable. 4.2 Cryptographic Module This Cryptographic Module is classified as a multi-chip standalone module for FIPS 140-2 purposes. As such, the module must be tested upon a particular operating system and computer platform. The cryptographic boundary thus includes the Cryptographic Module running on selected platforms running selected operating systems while configured in "single user" mode. The Cryptographic Module was validated as meeting all FIPS 140-2 Level 1 security requirements, including cryptographic key management and operating system requirements. The Cryptographic Module is packaged as a set of dynamically loaded modules or shared library files which contain the module's entire executable code. Additionally, the Cryptographic Module relies on the physical security provided by the host PC in which it runs. The Route1 FIPS Cryptographic Module toolkit was tested on the following platforms: · Microsoft Windows 2003 Server, Service Pack 1 x86 (Intel Pentium 4) Binary executable built with Microsoft Visual Studio 2005. Compliance is maintained on platforms for which the binary executable remains unchanged including (but not limited to): o Microsoft Windows 2000 Professional, Service Pack 4 (32-bit) o Microsoft Windows XP, Service Pack 1 (32-bit) o Microsoft Windows XP, Service Pack 2 (32-bit). 7 Route1 FIPS Cryptographic Module Refer to the NIST document, Implementation Guidance for FIPS PUB 140-2 and the Cryptographic Module Validation Program, for resolution on the issue of "Multi User" modes. This document is located at: http://csrc.nist.gov/cryptval/140-1/FIPS1402IG.pdf. 4.3 Module Interfaces The Cryptographic Module is evaluated as a multi-chip, standalone module. The Cryptographic Module's physical interfaces consist of the keyboard, mouse, monitor, CD-ROM drive, floppy drive, serial ports, USB ports, COM ports, and network adapter(s). However, the module sends/receives data entirely through the underlying logical interface, a C-language API documented in the Cryptographic Module API Reference. The module provides for Control Input through the API calls. Data Input and Output are provided in the variables passed with API calls, and Status Output is provided through the returns, exceptions, and error codes that are documented for each call. 4.4 Roles and Services The Cryptographic Module meets all FIPS 140-2 Level 1 requirements for Roles and Services, implementing both a User (User) role and Officer (CO) role. As allowed by FIPS 140-2, the Cryptographic Module does not support user identification or authentication for these roles. Only one role may be active at a time and the Cryptographic Module does not allow concurrent operators. Table 1. Cryptographic Module Roles and Services Role Services Officer The Officer has access to a superset of the services that are available to the User. The Officer role may also invoke the full set of self tests inside the module. User The User may perform general security functions. The User may also call specific FIPS 140 module functions. 4.4.1 Officer Role An operator assuming the Officer role can call any of the module's functions. The complete list of the functionality available to the Officer is outlined in Services on page 16. 4.4.2 User Role An operator assuming the User role can utilize the entire Cryptographic Module API except for the R_FIPS140_self_test_full() method, which is reserved for the Officer. The Cryptographic Module API functions are documented in Services on page 16. 8 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Route1 FIPS Cryptographic Module 4.5 Cryptographic Key Management 4.5.1 Key Generation The Cryptographic Module supports generation of DSA, RSA, Diffie-Hellman (DH) and ECC public and private keys. Furthermore, the module employs a FIPS 186-2 compliant random number generator as well as a Dual Elliptic Curve Deterministic Random Bit Generator for generating asymmetric and symmetric keys used in algorithms such as AES, TDES, RSA, DSA, Diffie-Hellman or ECC. 4.5.2 Key Storage The Cryptographic Module does not provide long-term cryptographic key storage. If a User chooses to store keys, the User is responsible for storing keys exported from the module. Volatile (short term) memory storage of cryptographic keys employed by the cryptographic module is handled in the following manner: Note: The User and Officer roles have equal and complete access to all keys listed in Table 2. Table 2. Cryptographic Module Key Storage Item Storage AES keys In volatile memory only (plaintext) Triple DES keys In volatile memory only (plaintext) HMAC with SHA1 and SHA2 keys In volatile memory only (plaintext) Diffie-Hellman public key In volatile memory only (plaintext) Diffie-Hellman private key In volatile memory only (plaintext) ECC public key In volatile memory only (plaintext) ECC private key In volatile memory only (plaintext) RSA public key In volatile memory only (plaintext) RSA private key In volatile memory only (plaintext) DSA public key In volatile memory only (plaintext) DSA private key In volatile memory only (plaintext) PRNG seeds(FIPS 186-2 and ECDRBG) In volatile memory only (plaintext) 4.5.3 Key Access An authorized operator of the module has access to all key data created during the module's operation. 9 Route1 FIPS Cryptographic Module 4.5.4 Key Protection/Zeroization All key data resides in internally allocated data structures and can be output only using the module's defined API. The operating system protects memory and process space from unauthorized access. The operator should follow the steps outlined in the Cryptographic Module Developer's Guide to ensure sensitive data is protected by zeroizing the data from memory when it is no longer needed. 4.6 Cryptographic Algorithms The Cryptographic Module supports a wide variety of cryptographic algorithms. FIPS 140-2 requires that FIPS-approved algorithms be used whenever there is an applicable FIPS standard. The following table lists the FIPS approved algorithms supported by the Cryptographic Module. Table 3. Cryptographic Module FIPS-Approved Algorithms Algorithm Validation Certificate AES ECB, CBC, CFB (128), OFB (128), CTR ­ [128, 192, 256 bit key sizes] Cert. 673 AES CCM Cert. 673 3DES ECB, CBC, CFB (64bit) , and OFB (64 bit) Cert. 618 DSA Cert. 254 EC-DSA, EC-DSA-SHA1 Cert. 74 FIPS 186-2 PRNG (Change Notice 1-with and without the mod q step) Cert. 392 RSA X9.31, PKCS#1 V.1.5, PKCS#1 V.2.1 (SHA256 - PSS) Cert. 314 SHA-1 Cert. 706 SHA-224, 256, 384, 512 Cert. 706 HMAC-SHA1, SHA224, SHA256, SHA384, SHA512 Cert. 357 Table 4. Cryptographic Module Non-FIPS Approved Algorithms Allowed for Use in FIPS mode Algorithm Use Diffie-Hellman Non-Approved (Allowed in FIPS mode for key transport) EC-Diffie-Hellman Non-Approved (Allowed in FIPS mode for key transport) RSA encrypt/decrypt Non-Approved (Allowed in FIPS mode for key transport) Table 5. Cryptographic Module Non-FIPS Approved Algorithms Algorithm DES MD2 10 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Route1 FIPS Cryptographic Module MD5 HMAC MD5 DES40 RC2 RC4 RC5 ECAES RSA PKCS #1 V.2.0 (SHA256 - OAEP) ANSI X9.82/NIST SP 800-90 Dual EC Deterministic Random Number Generator (ECDRBG) (non-compliant) For more information on using the Cryptographic Module in a FIPS compliant manner refer to Secure Operation of the Cryptographic Module on page 13. 4.7 Self-Test The Cryptographic Module performs a number of power-up and conditional self-tests to ensure proper operation. 4.7.1 Power-Up Self-Tests The power-up self-tests implemented in the Cryptographic Module are: · AES Known Answer Tests (KATs) · AES CCM Known Answer Tests (KATs) · TDES KATs · DES KATs · SHA-1 KATs · SHA-256 KATs · SHA-384 KATs · SHA-512 KATs · HMAC SHA-1 KATs · HMAC SHA-224 KATs · HMAC SHA-256 KATs · HMAC SHA-384 KATs · HMAC SHA-512 KATs 11 Route1 FIPS Cryptographic Module · RSA Sign/verify test · DSA Sign/verify test · DH conditional test · ECDSA Sign/verify test · PRNG (FIPS 186-2 and ECDRBG) KATs · Software integrity test. Power-up self-tests are executed automatically when the module is loaded into memory. 4.7.2 Conditional Self-Tests The Cryptographic Module performs two conditional self-tests: a pair-wise consistency test each time the module generates a DSA, DH, RSA, or EC public/private key pair, and a continuous random number generator test each time the module produces random data per its FIPS 186-2 random number generator. 4.7.3 Critical Functions Test When operating in R_FIPS140_MODE_FIPS140_SSL, a known answer test is performed for MD5 and HMAC-MD5. When operating in R_FIPS140_MODE_FIPS140_ECC, a known answer test is performed for ECAES and ECDRBG. When operating in R_FIPS140_MODE_FIPS140_SSL_ECC, a known answer test is performed for MD5, HMAC-MD5, ECAES and ECDRBG. 4.7.4 Mitigation of Other Attacks RSA key operations implement blinding by default, providing a defense against timing attacks. Blinding is implemented through blinding modes, and the following options are available: · Blinding mode off · Blinding mode with no update, where the blinding value is constant for each operation · Blinding mode with full update, where a new blinding value is used for each operation. 12 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Secure Operation of the Cryptographic Module 5 Secure Operation of the Cryptographic Module This section provides an overview of how to securely operate the Cryptographic Module in order to be in compliance with the FIPS 140-2 standards. 5.1 Approved DSA and RSA Modulus Sizes In the FIPS approved mode, the DSA key-pair modulus sizes must be 1024 bits, and the RSA modulus size can range from 1024 to 4096 bits. 5.2 Modes of Operation There are six modes of operation: 1. R_FIPS140_MODE_FIPS140 2. R_FIPS140_MODE_FIPS140_ECC 3. R_FIPS140_MODE_FIPS140_SSL 4. R_FIPS140_MODE_FIPS140_SSL_ECC 5. R_FIPS140_MODE_NON_FIPS140 6. R_FIPS140_MODE_DISABLED. R_FIPS140_MODE_DISABLED indicates that the FIPS140 library is disabled, usually due to an internal or caller's usage error. The other modes vary in the set of algorithms available and which random number generator (FIPS 186-2 or ECDRBG) is the default. Cryptographic keys must not be shared between R_FIPS140_MODE_FIPS140/R_FIPS140_MODE_FIPS140_SSL and R_FIPS140_MODE_FIPS140_ECC /R_FIPS140_MODE_FIPS140_SSL_ECC/R_FIPS140_MODE_DISABLED/R_FIPS140_MODE_NON_FIPS140. Table 6. Cryptographic Module Modes of Operation Cryptographic Module Mode Description R_FIPS140_MODE_FIPS140 This mode provides the cryptographic algorithms listed in Table 3 Cryptographic Module FIPS-Approved Algorithms and Table 4 FIPS Approved Cryptographic Module Non-FIPS Approved Algorithms Allowed for Use in FIPS Mode above. The default Random Number Generator (RNG) is the FIPS 186-2 Pseudo Random Number Generator (PRNG). R_FIPS140_MODE_FIPS140_ECC This mode provides the same algorithms as R_FIPS140_MODE_FIPS140, however the RNG in this mode is the Not FIPS Approved Dual Elliptic Curve Deterministic Random Bit Generator (DRGB) 13 Secure Operation of the Cryptographic Module Cryptographic Module Mode Description (ANSI X9.82 Part 3). R_FIPS140_MODE_FIPS140_SSL This mode provides the MD5 message digest in addition to the algorithms available in R_FIPS140_MODE_FIPS140. This mode can be used in the context of the key establishment phase in the FIPS Approved if used with TLS protocol TLSv1 and TLSv1.1 protocol (see Implementation Guidance for implementations FIPS PUB 140-2 and the Cryptographic Module Validation Program, 7.1 Acceptable Key Establishment Protocols). The implementation guidance disallows the use of the SSLv2 and SSLv3 versions. Cipher suites that include non-FIPS approved algorithms are unavailable. This mode allows implementations of the TLS protocol to operate the Cryptographic Module in a FIPS 140-2 compliant manner with the FIPS 140-2 approved FIPS 186-2 PRNG as the default. R_FIPS140_MODE_FIPS140_SSL_ECC This mode provides the same algorithms as R_FIPS140_MODE_FIPS140_SSL with the addition of Elliptic Not FIPS Approved Curve Cryptography (ECC). In particular the random number generator in this mode is the Dual Elliptic Curve (EC) Deterministic Random Bit Generator (DRBG) (ANSI X9.82 Part 3). The same restrictions with respect to protocol versions and cipher suites as in R_FIPS140_MODE_FIPS140_SSL apply. R_FIPS140_MODE_NON_FIPS140 This mode allows users to operate the Cryptographic Module without any cryptographic algorithm restrictions. Not FIPS Approved R_FIPS140_MODE_DISABLED This mode indicates that the FIPS 140 library is disabled. No future transition into other modes is permitted. Not FIPS Approved 5.3 Operating the Cryptographic Module The Cryptographic Module operates in R_FIPS140_MODE_FIPS140 by default if the Cryptographic Module is initialized with the PRODUCT_DEFAULT_RESOURCE_LIST().The current mode of the cryptographic module can be determined with a call to R_FIPS140_get_mode(). The mode of the cryptographic module can be changed by using the function R_FIPS140_set_mode() with an information identifier from Table 5 Cryptographic Module Modes of Operation above. After setting the cryptographic module into a FIPS Approved mode, the Cryptographic Module enforces that only the FIPS approved algorithms listed in Services on page 16 are available to operators. To disable FIPS mode, call R_FIPS140_set_mode() with the mode identifier R_FIPS140_MODE_NON_FIPS140. The following Services are restricted to operation by the Officer: · R_FIPS140_self_tests_full() The user of the Cryptographic Module shall link with the static library for their platform which will load the cryptographic module's shared or dynamic link master and provider libraries at runtime. 14 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Secure Operation of the Cryptographic Module 5.4 Startup Self Tests The Cryptographic Module offers the ability to configure when power up self tests are executed. To operate the Cryptographic Module in a FIPS 140-2 compliant manner the default shipped configuration, which executes the self tests when the module is first loaded, must be used. 5.5 Random Number Generator The Route1 FIPS Cryptographic Module provides a FIPS 186-2 Pseudo Random Number Generator and uses this PRNG internally in all operations that require the generation of random numbers. 15 Services 6 Services The Cryptographic Module provides the following services. For details of the operation of each of these services see the Developers Guide. Table 7. Route1 FIPS Cryptographic Module Services Function Function BIO_append_filename R_FIPS140_load_module BIO_clear_flags R_FIPS140_MODE_from_string BIO_clear_retry_flags R_FIPS140_MODE_to_string BIO_copy_next_retry R_FIPS140_new BIO_debug_cb R_FIPS140_RESULT_from_string BIO_dump R_FIPS140_RESULT_to_string BIO_dump_format R_FIPS140_ROLE_from_string BIO_dup_chain R_FIPS140_ROLE_to_string BIO_f_buffer R_FIPS140_self_tests_full BIO_f_null R_FIPS140_self_tests_short BIO_find_type R_FIPS140_set_info BIO_flags_to_string R_FIPS140_set_interface_version BIO_flush R_FIPS140_set_mode BIO_free R_FIPS140_set_role BIO_free_all R_FIPS140_STATE_from_string BIO_get_cb R_FIPS140_STATE_to_string BIO_get_cb_arg R_FIPS140_unload_module BIO_get_close R_FORMAT_from_string BIO_get_flags R_FORMAT_to_string BIO_get_fp R_free BIO_get_retry_BIO R_get_mem_functions 16 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Services Function Function BIO_get_retry_flags R_HW_CTX_build_device_handle_list BIO_get_retry_reason R_HW_CTX_free BIO_gets R_HW_CTX_get_device_handle_list BIO_method_name R_HW_CTX_get_device_handle_list_count BIO_method_type R_HW_CTX_get_device_handle_list_handle BIO_new R_HW_CTX_get_info BIO_new_file R_HW_CTX_iterate_devices BIO_new_fp R_HW_CTX_new BIO_new_mem R_HW_CTX_probe_devices BIO_open_file R_HW_CTX_set_info BIO_pop R_HW_DEV_get_device_driver_id BIO_print_hex R_HW_DEV_get_device_name BIO_printf R_HW_DEV_get_device_number BIO_push R_HW_DEV_get_info BIO_puts R_HW_DEV_is_equal BIO_read R_HW_DEV_set_info BIO_read_filename R_HW_DRIVER_free BIO_reference_inc R_HW_DRIVER_get_info BIO_reset R_HW_DRIVER_load_devices BIO_retry_type R_HW_DRIVER_new BIO_rw_filename R_HW_DRIVER_probe_devices BIO_s_file R_HW_DRIVER_set_info BIO_s_mem R_HW_OBJ_dup BIO_s_null R_HW_OBJ_free BIO_seek R_HW_OBJ_get_info BIO_set_bio_cb R_HW_OBJ_init 17 Services Function Function BIO_set_cb R_HW_OBJ_new BIO_set_cb_arg R_HW_OBJ_set_info BIO_set_close R_HW_SEARCH_eof BIO_set_flags R_HW_SEARCH_free BIO_set_fp R_HW_SEARCH_get_locate_count BIO_should_io_special R_HW_SEARCH_locate BIO_should_read R_HW_SEARCH_new BIO_should_retry R_HW_SEARCH_next BIO_should_write R_HW_SEARCH_set_browse BIO_tell R_LIB_CTX_free BIO_write R_LIB_CTX_get_detail_string BIO_write_filename R_LIB_CTX_get_error_string PRODUCT_DEFAULT_RESOURCE_LIST R_LIB_CTX_get_function_string PRODUCT_FIPS140_ECC_SWITCH_RESOURCE_LIST R_LIB_CTX_get_info PRODUCT_FIPS140_SSL_ECC_SWITCH_RESOURCE_LIST R_LIB_CTX_get_reason_string PRODUCT_FIPS140_SSL_SWITCH_RESOURCE_LIST R_LIB_CTX_new PRODUCT_FIPS140_SWITCH_RESOURCE_LIST R_LIB_CTX_set_info PRODUCT_LIBRARY_FREE R_lock_ctrl PRODUCT_LIBRARY_INFO R_lock_get_cb PRODUCT_LIBRARY_INFO_TYPE_FROM_STRING R_lock_get_name PRODUCT_LIBRARY_INFO_TYPE_TO_STRING R_lock_num PRODUCT_LIBRARY_NEW R_lock_r PRODUCT_LIBRARY_VERSION R_lock_set_c PRODUCT_NON_FIPS140_SWITCH_RESOURCE_LIST R_lock_w R_CR_asym_decrypt R_locked_add R_CR_asym_decrypt_init R_locked_add_get_cb 18 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Services Function Function R_CR_asym_encrypt R_locked_add_set_cb R_CR_asym_encrypt_init R_lockid_new R_CR_CTX_alg_supported R_lockids_free R_CR_CTX_free R_malloc R_CR_CTX_get_info R_PKEY_cmp R_CR_CTX_ids_from_sig_id R_PKEY_CTX_free R_CR_CTX_ids_to_sig_id R_PKEY_CTX_get_info R_CR_CTX_new R_PKEY_CTX_get_LIB_CTX R_CR_CTX_set_info R_PKEY_CTX_new R_CR_decrypt R_PKEY_CTX_set_info R_CR_decrypt_final R_PKEY_decode_pkcs8 R_CR_decrypt_init R_PKEY_delete_device R_CR_decrypt_update R_PKEY_encode_pkcs8 R_CR_DEFINE_CUSTOM_CIPHER_LIST R_PKEY_FORMAT_from_string R_CR_DEFINE_CUSTOM_METHOD_TABLE R_PKEY_FORMAT_to_string R_CR_derive_key R_PKEY_free R_CR_digest R_PKEY_from_binary R_CR_digest_final R_PKEY_from_bio R_CR_digest_init R_PKEY_from_file R_CR_digest_update R_PKEY_from_public_key_binary R_CR_dup R_PKEY_get_handle R_CR_encrypt R_PKEY_get_info R_CR_encrypt_final R_PKEY_get_num_bits R_CR_encrypt_init R_PKEY_get_num_primes R_CR_encrypt_update R_PKEY_get_PKEY_CTX R_CR_free R_PKEY_get_private_handle 19 Services Function Function R_CR_generate_key R_PKEY_get_public_handle R_CR_generate_key_init R_PKEY_get_purpose R_CR_generate_parameter R_PKEY_get_type R_CR_generate_parameter_init R_PKEY_iterate_fields R_CR_get_crypto_provider_name R_PKEY_METHOD_free R_CR_get_default_imp_method R_PKEY_METHOD_get_flag R_CR_get_default_method R_PKEY_METHOD_get_name R_CR_get_default_signature_map R_PKEY_METHOD_get_type R_CR_get_detail R_PKEY_new R_CR_get_detail_string R_PKEY_PASSWORD_TYPE_from_string R_CR_get_detail_string_table R_PKEY_PASSWORD_TYPE_to_string R_CR_get_device_handle R_PKEY_pk_method R_CR_get_error R_PKEY_print R_CR_get_error_string R_PKEY_public_cmp R_CR_get_file R_PKEY_public_to_bio R_CR_get_function R_PKEY_public_to_file R_CR_get_function_string R_PKEY_read_device R_CR_get_function_string_table R_PKEY_reference_inc R_CR_get_info R_PKEY_rsa_blinding_lib_start R_CR_get_line R_PKEY_rsa_no_blinding_lib_start R_CR_get_reason R_PKEY_set_handle R_CR_get_reason_string R_PKEY_set_info R_CR_get_reason_string_table R_PKEY_set_private_handle R_CR_ID_from_string R_PKEY_set_public_handle R_CR_ID_sign_to_string R_PKEY_set_purpose R_CR_ID_to_string R_PKEY_to_binary 20 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Services Function Function R_CR_key_exchange_init R_PKEY_to_bio R_CR_key_exchange_phase_1 R_PKEY_to_file R_CR_key_exchange_phase_2 R_PKEY_to_public_key_binary R_CR_mac R_PKEY_TYPE_from_string R_CR_mac_final R_PKEY_TYPE_to_string R_CR_mac_init R_PKEY_write_device R_CR_mac_update R_realloc R_CR_new R_remalloc R_CR_random_bytes R_RES_LIST_get_item R_CR_random_seed R_RES_LIST_get_resource R_CR_RES_CRYPTO_CUSTOM_METHOD R_RES_LIST_set_item R_CR_set_info R_RES_LIST_set_resource R_CR_sign R_set_mem_functions R_CR_sign_final R_SKEY_delete_device R_CR_sign_init R_SKEY_free R_CR_sign_update R_SKEY_get_handle R_CR_SUB_from_string R_SKEY_get_info R_CR_SUB_to_string R_SKEY_new R_CR_TYPE_from_string R_SKEY_read_device R_CR_TYPE_to_string R_SKEY_set_handle R_CR_verify R_SKEY_set_info R_CR_verify_final R_SKEY_write_device R_CR_verify_init R_thread_id R_CR_verify_mac R_thread_id_get_cb R_CR_verify_mac_final R_thread_id_set_cb R_CR_verify_mac_init R_TIME_cmp 21 Services Function Function R_CR_verify_mac_update R_TIME_CTX_free R_CR_verify_update R_TIME_CTX_new R_ERROR_EXIT_CODE R_TIME_dup R_FIPS140_free R_TIME_export R_FIPS140_get_default R_TIME_free R_FIPS140_get_failure_reason R_TIME_get_time_mi_method R_FIPS140_get_failure_reason_string R_TIME_get_utc_time_method R_FIPS140_get_info R_TIME_import R_FIPS140_get_interface_version R_TIME_new R_FIPS140_get_mode R_TIME_offset R_FIPS140_get_role R_TIME_time R_FIPS140_get_supported_interfaces R_unlock_r R_FIPS140_library_free R_unlock_w R_FIPS140_library_init 22 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy Acronyms and Definitions 7 Acronyms and Definitions The following table gives an explanation of the terms and acronyms used throughout this document. Table 8. Route1 FIPS Cryptographic Module Services Term Description AES Advanced Encryption Standard. A fast block cipher with a 128-bit block, and keys of lengths 128, 192 and 256 bits. This will replace DES as the US symmetric encryption standard. API Application Programming Interface Attack Either a successful or unsuccessful attempt at breaking part or all of a cryptosystem. Various attack types include an algebraic attack, birthday attack, brute force attack, chosen ciphertext attack, chosen plaintext attack, differential cryptanalysis, known plaintext attack, linear cryptanalysis, and middleperson attack. DES Data Encryption Standard. A symmetric encryption algorithm with a 56-bit key. See also Triple DES. Diffie-Hellman The Diffie-Hellman asymmetric key exchange algorithm. There are many variants, but typically two entities exchange some public information (for example, public keys or random values) and combine them with their own private keys to generate a shared session key. As private keys are not transmitted, eavesdroppers are not privy to all of the information that composes the session key. DSA Digital Signature Algorithm. An asymmetric algorithm for creating digital signatures. EC Elliptic Curve ECC Elliptic Curve Cryptography Encryption The transformation of plaintext into an apparently less readable form (called ciphertext) through a mathematical process. The ciphertext may be read by anyone who has the key that decrypts (undoes the encryption) the ciphertext. FIPS Federal Information Processing Standards HMAC Keyed-Hashing for Message Authentication Code KAT Known Answer Test Key A string of bits used in cryptography, allowing people to encrypt and decrypt data. Can be used to perform other mathematical operations as well. Given a cipher, a key determines the mapping of the plaintext to the ciphertext. Various types of keys include: distributed key, private key, public key, secret key, session key, shared key, subkey, symmetric key, and weak key. NIST National Institute of Standards and Technology. A division of the US Department of Commerce (formerly known as the NBS) which produces security and cryptography-related 23 Acronyms and Definitions Term Description standards. OS Operating System PC Personal Computer PDA Personal Digital Assistant PPC PowerPC privacy The state or quality of being secluded from the view and/or presence of others. private key The secret key in public key cryptography. Primarily used for decryption but also used for encryption with digital signatures. PRNG Pseudo Random Number Generator RC2 Block cipher developed by Ron Rivest as an alternative to the DES. It has a block size of 64 bits and a variable key size. It is a legacy cipher and RC5 should be used in preference. RC4 Symmetric algorithm designed by Ron Rivest using variable length keys (usually 40 bit or 128 bit). RC5 Block cipher designed by Ron Rivest. It is parameterizable in its word size, key length and number of rounds. Typical use involves a block size of 64 bits, a key size of 128 bits and either 16 or 20 iterations of its round function. RNG Random Number Generator RSA Public key (asymmetric) algorithm providing the ability to encrypt data and create and verify digital signatures. RSA stands for Rivest, Shamir, and Adleman, the developers of the RSA public key cryptosystem. SHA Secure Hash Algorithm. An algorithm which creates a unique hash value for each possible input. SHA takes an arbitrary input which is hashed into a 160-bit digest. SHA-1 A revision to SHA to correct a weakness. It produces 160-bit digests. SHA-1 takes an arbitrary input which is hashed into a 20-byte digest. SHA-2 The NIST-mandated successor to SHA-1, to complement the Advanced Encryption Standard. It is a family of hash algorithms (SHA-256, SHA-384 and SHA-512) which produce digests of 256, 384 and 512 bits respectively. Triple DES A variant of DES which uses three 56-bit keys. 24 Route1 FIPS Cryptographic Module 2.1.0.3 Security Policy