FIPS 140-2 Security Policy FortiGate-100D/200B/200D/300C/600C/800C WAN 1 DMZ HA 1 1 3 5 7 9 11 13 15 15 STATUS ALARM HA POWER USB MGMT USB USB CONSOLE WAN 2 MGMT HA 2 2 4 6 8 10 12 14 16 16 SHARED SFP 1/2 3/4 5/6 7/8 9 / 10 11 / 12 13 / 14 15 / 16 FSM STATUS ALARM FortiGate 200B HA USB CONSOLE USB POWER FortiASIC NP2 Powered WAN 1 1 3 5 7 9 11 13 15 DMZ 1 CONSOLE FortiGate 200D STATUS ALARM HA POWER USB MGMT MGMT USB WAN 2 2 4 6 8 10 12 14 16 DMZ 2 STATUS ALARM HA POWER 3/4 1/2 5/6 7/8 9/10 CONSOLE USB USB MGMT FortiASIC Powered STATUS ALARM HA POWER USB USB MGMT CONSOLE WAN 1 / 1 3/4 5/6 7/8 9 / 10 11 / 12 13 / 14 MGMT 1 / MGMT 2 WAN 2 / 2 15 / 16 17 / 18 19 / 20 21 / 22 19 / 20 21 / 22 FAIL OPEN FAIL OPEN SHARED INTERFACES MGMT 1 WAN 1 WAN 2 3 5 7 9 11 13 15 17 15 17 19 21 19 21 23 STATUS ALARM HA POWER USB 20 22 20 22 24 MGMT 2 1 2 4 6 8 10 12 14 16 18 16 18 USB MGMT CONSOLE SFP+ FAIL OPEN FAIL OPEN SHARED INTERFACES SHARED INTERFACES FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy Document Version: 1.7 Publication Date: April 29, 2015 Description: Documents FIPS 140-2 Level 2 Security Policy issues, compliancy and requirements for FIPS compliant operation. Firmware Version: FortiOS 5.0, build0305,141216 Hardware Version: FortiGate-100D (C4LL40) FortiGate-300C (C4HY50) FortiGate-200B (C4CD24) FortiGate-600C (C4HZ51) FortiGate-200D (C4KV72) FortiGate-800C (C4LH81) FortiGate-100D/200B/200D/300C/600C/800C: FIPS 140-2 Security Policy 01-505-211975-20130706 for FortiOS 5.0 © Copyright 2015 Fortinet, Inc. This document may be freely reproduced and distributed whole and intact including this copyright notice. Trademarks Dynamic Threat Prevention System (DTPS), APSecure, FortiASIC, FortiBIOS, FortiBridge, FortiClient, FortiGate®, FortiGate Unified Threat Management System, FortiGuard®, FortiGuard-Antispam, FortiGuard-Antivirus, FortiGuard-Intrusion, FortiGuard-Web, FortiLog, FortiAnalyzer, FortiManager, Fortinet®, FortiOS, FortiPartner, FortiProtect, FortiReporter, FortiResponse, FortiShield, FortiVoIP, and FortiWiFi are trademarks of Fortinet, Inc. in the United States and/or other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Security Level Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Module Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cryptographic Module Ports and Interfaces . . . . . . . . . . . . . . . . . . . . . 5 FortiGate-100D Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FortiGate-200B Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 FortiGate-200D Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 FortiGate-300C Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 FortiGate-600C Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FortiGate-800C Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Web-Based Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Roles, Services and Authentication . . . . . . . . . . . . . . . . . . . . . . . . 14 Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 FIPS Approved Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Physical Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Operational Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Cryptographic Key Management . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Random Number Generation . . . . . . . . . . . . . . . . . . . . . . . . . 21 Entropy Token . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Key Zeroization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Cryptographic Keys and Critical Security Parameters . . . . . . . . . . . . . 23 Alternating Bypass Feature . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Key Archiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Electromagnetic Interference/Electromagnetic Compatibility (EMI/EMC) . . . . . 26 Mitigation of Other Attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 FIPS 140-2 Compliant Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Enabling FIPS-CC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Self-Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Non-FIPS Approved Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 1 http://docs.fortinet.com/ • Feedback Overview This document is a FIPS 140-2 Security Policy for Fortinet Incorporated’s FortiGate-100D, 200B, 200D, 300C, 600C and 800C Multi-Threat Security Systems. This policy describes how the FortiGate-100D, 200B, 200D, 300C, 600C and 800C (hereafter referred to as the ‘modules’) meet the FIPS 140-2 security requirements and how to operate the module in a FIPS compliant manner. This policy was created as part of the Level 2 FIPS 140-2 validation of the modules. This document contains the following sections: • Introduction • Security Level Summary • Module Description • Mitigation of Other Attacks • FIPS 140-2 Compliant Operation • Self-Tests • Non-FIPS Approved Services The Federal Information Processing Standards Publication 140-2 - Security Requirements for Cryptographic Modules (FIPS 140-2) details the United States Federal Government requirements for cryptographic modules. Detailed information about the FIPS 140-2 standard and validation program is available on the NIST (National Institute of Standards and Technology) website at http://csrc.nist.gov/groups/STM/cmvp/index.html. References This policy deals specifically with operation and implementation of the module in the technical terms of the FIPS 140-2 standard and the associated validation program. Other Fortinet product manuals, guides and technical notes can be found at the Fortinet technical documentation website at http://docs.forticare.com. Additional information on the entire Fortinet product line can be obtained from the following sources: • Find general product information in the product section of the Fortinet corporate website at http://www.fortinet.com/products. • Find on-line product support for registered products in the technical support section of the Fortinet corporate website at http://www.fortinet.com/support • Find contact information for technical or sales related questions in the contacts section of the Fortinet corporate website at http://www.fortinet.com/contact. • Find security information and bulletins in the FortiGuard Center of the Fortinet corporate website at http://www.fortinet.com/FortiGuardCenter. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 2 http://docs.fortinet.com/ • Feedback Introduction Introduction The FortiGate product family spans the full range of network environments, from SOHO to service provider, offering cost effective systems for any size of application. FortiGate appliances detect and eliminate the most damaging, content-based threats from email and Web traffic such as viruses, worms, intrusions, inappropriate Web content and more in real time — without degrading network performance. In addition to providing application level firewall protection, FortiGate appliances deliver a full range of network-level services — VPN, intrusion prevention, web filtering, antivirus, antispam and traffic shaping — in dedicated, easily managed platforms. All FortiGate appliances employ Fortinet’s unique FortiASIC™ content processing chip and the powerful, secure, FortiOS™ firmware achieve breakthrough price/performance. The unique, ASIC-based architecture analyzes content and behavior in real time, enabling key applications to be deployed right at the network edge where they are most effective at protecting enterprise networks. They can be easily configured to provide antivirus protection, antispam protection and content filtering in conjunction with existing firewall, VPN, and related devices, or as complete network protection systems. The modules support High Availability (HA) in both Active-Active (AA) and Active-Passive (AP) configurations. FortiGate appliances support the IPSec industry standard for VPN, allowing VPNs to be configured between a FortiGate appliance and any client or gateway/firewall that supports IPSec VPN. FortiGate appliances also provide SSL VPN services using TLS 1.2 in the FIPS-CC mode of operation. Security Level Summary The module meets the overall requirements for a FIPS 140-2 Level 2 validation. . Table 1: Summary of FIPS security requirements and compliance levels Security Requirement Compliance Level Cryptographic Module Specification 2 Cryptographic Module Ports and Interfaces 3 Roles, Services and Authentication 3 Finite State Model 2 Physical Security 2 Operational Environment N/A Cryptographic Key Management 2 EMI/EMC 2 Self-Tests 2 Design Assurance 3 Mitigation of Other Attacks 2 FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 3 http://docs.fortinet.com/ • Feedback Module Description Module Description The FortiGate-100D, 200B, 200D, 300C, 600C and 800C are multiple chip, standalone cryptographic modules consisting of production grade components contained in a physically protected enclosure in accordance with FIPS 140-2 Level 2 requirements. • The FortiGate-100D has 24 network interfaces with a status LED for each network interface (22x 10/100/1000 BaseT and 2x shared interfaces (1GB SFP or 10/100/1000 Base-T) • The FortiGate-200B has 16 network interfaces with a status LED for each network interface (8x 10/100 BaseT, 8x 10/100/1000 BaseT) • The FortiGate-200D has 21 network interfaces with a status LED for each network interface (19x 10/100/1000 BaseT and 2x 1GB SFP) • The FortiGate-300C has 10 network interfaces with a status LED for each network interface (10x 10/100/1000 BaseT) • The FortiGate-600C has 30 network interfaces with a status LED for each network interface (8x shared interfaces (1GB SFP or 10/100/1000 Base-T), 22x 10/100/1000 Base-T) • The FortiGate-800C has 38 network interfaces with a status LED for each network interface (20x 10/100/1000 Base-T, 16x shared interfaces (1GB SFP or 10/100/1000 Base-T) and 2x 10GB SFP+) The modules are 1u rackmount devices. The FortiGate-600C module has a single, dual core, x86 compatible CPU. The FortiGate- 800C module has a single, quad core, x86 compatible CPU.The other modules have a single, x86 compatible CPU. The FortiGate-100D, 200B and 300C modules have 4 external ventilation fans on the back panel of the chassis. The FortiGate-600C and 800C have 5 external ventilation fans on the back panel of the chassis. The FortiGate-200D does not have any external ventilation fans. The FortiGate-100D, 600C and 800C have shared network interfaces support a 1GB SFP or 10/100/1000Base-T connection. Only one of the shared interface pair can be used at any given time. The FortiGate-100D has 2 shared interfaces, the FortiGate-600C has 8 shared interfaces and the FortiGate-800C modules has 16 shared network interfaces. The FortiGate-600C and 800C modules also have 4 paired Bypass interfaces (WAN1/Port1 and WAN2/Port2). If bypass is enabled, these interfaces provide a physical bypass of the paired port if the module fails, hangs or power is lost. The bypass capability is only available if the module is configure for Transparent operation, not NAT operation. Use of the bypass capability is a non-FIPS approved service. The FortiGate-200B has 1 Fortinet FSM slot and 1 64GB SSD drive is installed by default. The FortiGate-600C and 800C modules have 1, internal, 64GB SSD drive. The validated firmware version is FortiOS 5.0, build0305,141216. Figure 1, Figure 2, Figure 3, Figure 4, Figure 5 and Figure 6 are representative of the modules tested. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 4 http://docs.fortinet.com/ • Feedback Module Description Cryptographic Module Ports and Interfaces FortiGate-100D Module Figure 1: FortiGate-100D Front and Rear Panels Front WAN 1 DMZ HA 1 1 3 5 7 9 11 13 15 15 STATUS ALARM HA POWER USB MGMT USB USB CONSOLE WAN 2 MGMT HA 2 2 4 6 8 10 12 14 16 16 SHARED SFP USB Management Console Port SFP Ports Port Ethernet HA Ports WAN Ports USB Ports 17 -18 Ports 1-16 MGMT/DMZ Ports AC Power Connection AC Line 100-240V AC 60-50Hz 3-1.5A Back Table 2: FortiGate-100D Status LEDs LED State Description Power Green The module is powered on. Off The module is powered off. Status Flashing Green The module is starting up. Green The module is running normally. HA Green The module is operating in normal HA mode. Off The module is not operating in HA mode. Alarm N/A Not in use. WAN Ports, Link Green Port is online. MGMT Port, Flashing Green Port is receiving or sending data. DMZ Port, HA Off Port is not in use. Ports and Ports 1-16 Speed Green Connected at 1000 Mbps. Amber Connected at 100 Mbps. Off Connected at 10Mbps. Ports 17 and 18 Link Green Port is online. Flashing Green Port is receiving or sending data. Off Port is not in use. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 5 http://docs.fortinet.com/ • Feedback Module Description Table 3: FortiGate-100D Connectors and Ports Connector Type Speed Supported Logical Description Interfaces WAN Ports, RJ-45 10/100/1000 Data input, data Connection to10/100/1000 Base-T output, control input networks. MGMT Port, and status output DMZ Port, HA Ports and Ports 1-16 Ports 17 and 18 SFP 1 Gbps Data input, data Multimode fiber optic output, control input connections to gigabit optical and status output networks. Console Port RJ-45 9600 bps Control input, status Optional connection to the output management computer. Provides access to the command line interface (CLI). USB Port USB A N/A Key loading and Optional USB token and archiving, entropy entropy token. input USB MGMT USB N/A Control input, status Optional connection for mini-B output management or configuration using FortiExplorer. AC POWER N/A N/A Power 120/240VAC power connection. FortiGate-200B Module Figure 2: FortiGate-200B Front and Rear Panels 1/2 3/4 5/6 7/8 9 / 10 11 / 12 13 / 14 15 / 16 FSM STATUS ALARM FortiGate 200B HA USB CONSOLE USB POWER FortiASIC NP2 Powered Console Ports 1 to 8 Ports 9 to 16 USB B USB A +12V @8.3A AC LINE 100-240V AC 60-50Hz 2-1A DC INPUT FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL DC Power AC Power FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 6 http://docs.fortinet.com/ • Feedback Module Description Table 4: FortiGate-200B Status LEDs LED State Description Power Green The module is powered on. Off The module is powered off. Status Flashing Green The module is starting up. Green The module is running normally. HA Green The module is part of an HA cluster. Alarm Red A critical error has occurred. Amber A minor error has occurred. Off No errors detected. Ports 1 to 8 Link Green Port is online. Off Port is offline. Speed Amber Connected at 100 Mbps. Off Connected at 10Mbps. Ports 9 to 16 Link Green Port is online. Flashing Green Port is receiving or sending data. Speed Green Connected at 1000 Mbps. Amber Connected at 100 Mbps. Off Connected at 10Mbps. Table 5: FortiGate-200B Connectors and Ports Connector Type Speed Supported Logical Description Interfaces Ports 1 to 8 RJ-45 10/100 Data input, data Connection to10/100 Base_T output, control input networks. and status output Ports 9 to 16 RJ-45 10/100/1000 Data input, data Connection to10/100/1000 Base-T output, control input networks. and status output Console Port RJ-45 9600 bps Control input, status Optional connection to the output management computer. Provides access to the command line interface (CLI). USB Port USB A N/A Key loading and Optional USB token and archiving, entropy entropy token. input USB B Port USB B N/A N/A Future use. AC POWER N/A N/A Power 120/240VAC power connection. DC POWER N/A N/A Power +12VDC power connection. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 7 http://docs.fortinet.com/ • Feedback Module Description FortiGate-200D Module Figure 3: FortiGate-200D Front and Rear Panels WAN 1 1 3 5 7 9 11 13 15 DMZ 1 CONSOLE FortiGate 200D STATUS ALARM HA POWER USB MGMT MGMT USB WAN 2 2 4 6 8 10 12 14 16 DMZ 2 WAN Ports MGMT Port Ethernet Console and DMZ Ports Ports 1-16 USB Management USB Ports Port +12V=@12.5A AC INPUT 100-240V 50-60Hz 3A MAX DC INPUT FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL DC Power AC Power Table 6: FortiGate-200D Status LEDs LED State Description Power Green The module is powered on. Off The module is powered off. Status Flashing Green The module is starting up. Green The module is running normally. HA Green The module is part of an HA cluster. Alarm Red A critical error has occurred. Amber A minor error has occurred. Off No errors detected. MGMT Port, Link Green Port is online. WAN Ports and Flashing Green Port is receiving or sending data. Ports 1 to 16 Speed Green Connected at 1000 Mbps. Amber Connected at 100 Mbps. Off Connected at 10Mbps. DMZ Ports Link Green Port is online. Flashing Green Port is receiving or sending data. Off Port is not in use. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 8 http://docs.fortinet.com/ • Feedback Module Description Table 7: FortiGate-200D Connectors and Ports Connector Type Speed Supported Logical Description Interfaces MGMT Port, RJ-45 10/100/1000 Data input, data Connection to10/100/1000 WAN Ports and Base-T output, control input networks. and status output Ports 1 to 16 DMZ Ports SFP 1 Gbps Data input, data Multimode fiber optic output, control input connections to gigabit optical and status output networks. Console Port RJ-45 9600 bps Control input, status Optional connection to the output management computer. Provides access to the command line interface (CLI). USB Port USB A N/A Key loading and Optional USB token and archiving, entropy entropy token. input USB MGMT USB N/A Control input, status Optional connection for mini-B output management or configuration using FortiExplorer. AC POWER N/A N/A Power 120/240VAC power connection. DC POWER N/A N/A Power +12VDC power connection. FortiGate-300C Modules Figure 4: FortiGate-300C Front and Rear Panels STATUS ALARM HA POWER 3/4 9/10 1/2 5/6 7/8 CONSOLE USB USB MGMT FortiASIC Powered Ethernet USB Ports Ports 1 - 10 Console Port USB Management Port Power Connection Table 8: FortiGate-300C Status LEDs LED State Description Power Green The module is powered on. Off The module is powered off. Status Flashing Green The module is starting up. Green The module is running normally. HA Green HA is enabled. Red The module is in failover mode. Off The unit is in stand-alone mode. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 9 http://docs.fortinet.com/ • Feedback Module Description Table 8: FortiGate-300C Status LEDs Alarm Red The module is indicating a major fault. Amber The module is indicating a minor fault. Off The module is operating normally. Ports 1 to 10 Link Green Port is online. Flashing Green Port is receiving or sending data. Speed Green Connected at 1000 Mbps. Amber Connected at 100 Mbps. Off Connected at 10Mbps. Table 9: FortiGate-300C Connectors and Ports Connector Type Speed Supported Logical Description Interfaces Ports 1 to 10 RJ-45 10/100/1000 Data input, data Connection to10/100/1000 Base-T output, control input networks. and status output Console Port RJ-45 9600 bps Control input, status Optional connection to the output management computer. Provides access to the command line interface (CLI). USB Port USB A N/A Key loading and Optional USB token and archiving, entropy entropy token. input USB MGMT USB N/A Control input, status Optional connection for mini-B output management or configuration using FortiExplorer. AC POWER N/A N/A Power 120/240VAC power connection. FortiGate-600C Module Figure 5: FortiGate-600C Front and Rear Panels Front STATUS ALARM HA POWER USB USB MGMT CONSOLE WAN 1 / 1 3/4 5/6 7/8 9 / 10 11 / 12 13 / 14 15 / 16 17 / 18 19 / 20 21 / 22 19 / 20 21 / 22 MGMT 1 / MGMT 2 WAN 2 / 2 FAIL OPEN FAIL OPEN SHARED INTERFACES USB Port Console Port WAN Ports Shared USB Management Management Ethernet Ports 19 - 22 Port Ports Ports 3 -18 AC Power Connection Back FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 10 http://docs.fortinet.com/ • Feedback Module Description Table 10: FortiGate-600C Status LEDs LED State Description Power Green The module is powered on. Off The module is powered off. Status Flashing Green The module is starting up. Green The module is running normally. HA Green HA is enabled. Red The module is in failover mode. Off The unit is in stand-alone mode. Alarm Red The module is indicating a major fault. Amber The module is indicating a minor fault. Off The module is operating normally. MGMT1 and Link Green Port is online. MGMT2, Flashing Green Port is receiving or sending data. Ports 1 to 22 Speed Green Connected at 1000 Mbps. (Ethernet) Amber Connected at 100 Mbps. Off Connected at 10Mbps. Ports 19-22 Green Port is online. (SFP) Flashing Port is receiving or sending data. Table 11: FortiGate-600C Connectors and Ports Connector Type Speed Supported Logical Description Interfaces MGMT Ports, RJ-45 10/100/1000 Data input, data Connection to10/100/1000 WAN Ports, Base-T output, control input networks. Ports 1 to 22 and status output Ports 19-22 SFP 1 Gbps Data input, data Multimode fiber optic output, control input connections to gigabit optical and status output networks. Console Port RJ-45 9600 bps Control input, status Optional connection to the output management computer. Provides access to the command line interface (CLI). USB Port USB A N/A Key loading and Optional USB token and archiving, entropy entropy token. input USB MGMT USB N/A Control input, status Optional connection for mini-B output management or configuration using FortiExplorer. AC POWER N/A N/A Power 120/240VAC power connection. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 11 http://docs.fortinet.com/ • Feedback Module Description FortiGate-800C Module Figure 6: FortiGate-800C Front and Rear Panels MGMT 1 WAN 1 WAN 2 3 5 7 9 11 13 15 17 15 17 19 21 19 21 23 STATUS ALARM HA POWER USB 20 22 20 22 24 MGMT 2 1 2 4 6 8 10 12 14 16 18 16 18 USB MGMT CONSOLE SFP+ FAIL OPEN FAIL OPEN SHARED INTERFACES SHARED INTERFACES USB Port Console Port WAN Ports Shared SFP+ Ports Ports 15 - 18 23-24 USB Management Management Ethernet Shared Port Ports Ports 3 -14 Ports 19 - 22 Power Connection Optional 2nd Power Connection Table 12: FortiGate-800C Status LEDs LED State Description Power Green The module is powered on. Off The module is powered off. Status Flashing Green The module is starting up. Green The module is running normally. HA Green HA is enabled. Red The module is in failover mode. Off The unit is in stand-alone mode. Alarm N/A Not in use. MGMT Ports, Link Green Port is online. WAN Ports, Flashing Green Port is receiving or sending data. and Speed Green Connected at 1000 Mbps. Ports 1 to 22 (Ethernet) Amber Connected at 100 Mbps. Off Connected at 10Mbps. Ports 15 to 22 Link Green Port is online. (SFP) Flashing Green Port is receiving or sending data. Off Port is not in use. Ports 23 to 24 Link Green Port is online. (SFP+) Flashing Green Port is receiving or sending data. Off Port is not in use. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 12 http://docs.fortinet.com/ • Feedback Module Description Table 13: FortiGate-800C Connectors and Ports Connector Type Speed Supported Logical Description Interfaces MGMT Ports, RJ-45 10/100/1000 Data input, data Connection to10/100/1000 Base-T output, control input networks. WAN Ports, and and status output Ports 1 to 22 Ports 15-22 SFP 1 Gbps Data input, data Multimode fiber optic output, control input connections to gigabit optical and status output networks. Ports 23-24 SFP+ 10 Gbps Data input, data Multimode fiber optic output, control input connections to 10 gigabit and status output optical networks. Console Port RJ-45 9600 bps Control input, status Optional connection to the output management computer. Provides access to the command line interface (CLI). USB Port USB A N/A Key loading and Optional USB token and archiving, entropy entropy token. input USB MGMT USB N/A Control input, status Optional connection for mini-B output management or configuration using FortiExplorer. AC POWER N/A N/A Power 120/240VAC power connection. Web-Based Manager The FortiGate web-based manager provides GUI based access to the module and is the primary tool for configuring the module. The manager requires a web browser on the management computer and an Ethernet connection between the FortiGate unit and the management computer. A web-browser that supports Transport Layer Security (TLS) 1.0 is required for remote access to the web-based manager when the module is operating in FIPS-CC mode. HTTP access to the web-based manager is not allowed in FIPS-CC mode and is disabled. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 13 http://docs.fortinet.com/ • Feedback Module Description Figure 7: The FortiGate web-based manager Command Line Interface The FortiGate Command Line Interface (CLI) is a full-featured, text based management tool for the module. The CLI provides access to all of the possible services and configuration options in the module. The CLI uses a console connection or a network (Ethernet) connection between the FortiGate unit and the management computer. The console connection is a direct serial connection. Terminal emulation software is required on the management computer using either method. For network access, a Telnet or SSH client that supports the SSH v2.0 protocol is required (SSH v1.0 is not supported in FIPS- CC mode). Telnet access to the CLI is not allowed in FIPS-CC mode and is disabled. Roles, Services and Authentication Roles When configured in FIPS-CC mode, the module provides the following roles: • Crypto Officer • Network User The Crypto Officer role is initially assigned to the default ‘admin’ operator account. The Crypto Officer role has read-write access to all of the module’s administrative services. The initial Crypto Officer can create additional operator accounts. These additional accounts are assigned the Crypto Officer role and can be assigned a range of read/write or read only access permissions including the ability to create operator accounts. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 14 http://docs.fortinet.com/ • Feedback Module Description The module provides a Network User role for end-users (Users). Network users can make use of the encrypt/decrypt services, but cannot access the module for administrative purposes. The module does not provide a Maintenance role. FIPS Approved Services The following tables detail the types of FIPS approved services available to each role in each mode of operation, the types of access for each role and the Keys or CSPs they affect. The role names are abbreviated as follows: Crypto Officer CO User U The access types are abbreviated as follows: Read Access R Write Access W Execute Access E Table 14: Services available to Crypto Officers Service Access Key/CSP authenticate to module* WE Operator Password, Diffie-Hellman Key, HTTP/TLS and SSH Server/Host Keys, HTTPS/TLS and SSH Session Authentication Keys, and HTTPS/TLS Session Encryption Keys, DRBG Output, DRBG Seed, DRBG Input String show system status WE N/A show FIPS-CC mode WE N/A enabled/disabled (console/CLI only) enable FIPS-CC mode of operation WE Configuration Integrity Key (console only) execute factory reset (zeroize keys, E See “Key Zeroization” on page 21 disable FIPS-CC mode, console/CLI only) execute FIPS-CC on-demand self- E Configuration Integrity Key, Firmware tests (console only) Integrity Key add/delete operators and network WE Operator Password, users Network User Password set/reset operator and network user WE Operator Password, passwords Network User Password backup/restore configuration file WE Configuration Encryption Key, Configuration Backup Key read/set/delete/modify module WE N/A configuration enable/disable alternating bypass WE N/A mode FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 15 http://docs.fortinet.com/ • Feedback Module Description Table 14: Services available to Crypto Officers Service Access Key/CSP read/set/delete/modify IPSec/SSL N/A IPSec: IPSec Manual Authentication VPN configuration* Key, IPSec Manual Encryption Key, IKE Pre-Shared Key, IKE RSA Key SSL: HTTPS/TLS Server/Host Key, HTTPS/TLS Session Authentication Key, HTTPS/TLS SSH Session Encryption Key read/set/modify HA configuration WE HA Password, HA Encryption Key execute firmware update E Firmware Update Key read log data WE N/A delete log data (console/CLI only) N/A N/A execute system diagnostics WE N/A (console/CLI only) Table 15: Services available to Network Users Service/CSP Access Key/CSP authenticate to module* E Network User Password, Diffie-Hellman Key, HTTPS/TLS Server/Host Key, HTTPS/TLS Session Authentication Key, HTTPS/TLS Session Encryption Key, DRBG Output, DRBG Seed, DRBG Input String IPSec VPN controlled by firewall E Diffie-Hellman Key, IKE and IPSec Keys, policies* DRBG Output, DRBG Seed, DRBG Input String SSL VPN controlled by firewall E Network User Password, Diffie-Hellman policies* Key, HTTPS/TLS Server/Host Key, HTTPS/TLS Session Authentication Key, HTTPS/TLS Session Encryption Key, DRBG Output, DRBG Seed, DRBG Input String Note: Services marked with an asterisk (*) may use non-compliant encryption strengths for Diffie-Hellman and RSA. Refer to Table 17 for descriptions of the minimum required encryption strengths for compliance. Authentication The module implements identity based authentication. Operators must authenticate with a user-id and password combination to access the modules remotely or locally via the console. Remote operator authentication is done over HTTPS (TLS) or SSH. The password entry feedback mechanism does not provide information that could be used to guess or determine the authentication data. By default, Network User access to the modules is based on firewall policy and authentication by IP address or fully qualified domain names. Network Users can optionally be forced to authenticate to the modules using a username/password combination to enable use of the IPSec VPN encrypt/decrypt or bypass services. For Network Users invoking the SSL-VPN encrypt/decrypt services, the modules support authentication with a user-id/password combination. Network User authentication is done over HTTPS and does not allow access to the modules for administrative purposes. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 16 http://docs.fortinet.com/ • Feedback Module Description Note that operator authentication over HTTPS/SSH and Network User authentication over HTTPS are subject to a limit of 3 failed authentication attempts in 1 minute. Operator authentication using the console is not subject to a failed authentication limit, but the number of authentication attempts per minute is limited by the bandwidth available over the serial connection. The minimum password length is 8 characters when in FIPS-CC mode (maximum password length is 32 characters). The password may contain any combination of upper- and lower-case letters, numbers, and printable symbols; allowing for 94 possible characters. The odds of guessing a password are 1 in 94^8 which is significantly lower than one in a million. Recommended procedures to increase the password strength are explained in “FIPS 140-2 Compliant Operation” on page 27. For Network Users invoking the IPSec VPN encrypt/decrypt services, the module acts on behalf of the Network User and negotiates a VPN connection with a remote module. The strength of authentication for IPSec services is based on the authentication method defined in the specific firewall policy: IPSec manual authentication key, IKE pre-shared key or IKE RSA key (RSA certificate). The odds of guessing the authentication key for each IPSec method is: 1 in 1640 for the IPSec Manual Authentication key (based on a 40 digit, hexadecimal • key) 1 in 948 for the IKE Pre-shared Key (based on an 8 character, ASCII printable key) • 1 in 280 for the IKE RSA Key (based on a 1024bit RSA key size) • Therefore the minimum odds of guessing the authentication key for IPSec is 1 in 948, based on the IKE Pre-shared key. Physical Security The modules meet FIPS 140-2 Security Level 2 requirements by using production grade components and an opaque, sealed enclosure. Access to the enclosure is restricted through the use of tamper-evident seals to secure the overall enclosure. The seals are blue wax/plastic with white lettering that reads “Fortinet Inc. Security Seal”. The tamper seals are not applied at the factory prior to shipping. It is the responsibility of the Crypto Officer to apply the seals before use to ensure full FIPS 140-2 compliance. Once the seals have been applied, the Crypto Officer must develop an inspection schedule to verify that the external enclosure of the module and the tamper seals have not been damaged or tampered with in any way. Upon viewing any signs of tampering, the Crypto Officer must assume that the device has been fully compromised. The Crypto Officer is required to zeroize the cryptographic module by following the steps in the Key Zeroization section of the SP. The Crypto Officer is also responsible for securing and controlling any unused seals. The surfaces should be cleaned with 99% Isopropyl alcohol to remove dirt and oil before applying the seals. Ensure the surface is completely clean and dry before applying the seals. If a seal needs to be re-applied, completely remove the old seal and clean the surface with an adhesive remover before following the instructions for applying a new seal. Additional seals can be requested through your Fortinet sales contact. Reference the following SKUs when ordering: FIPS-SEAL-RED or FIPS-SEAL-BLUE. Specify the type and number of seals required based on the specific module as described below: The FortiGate-100D uses one seal to secure the external enclosure (see Figure 9). The FortiGate-200B uses 2 blue seals to secure: FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 17 http://docs.fortinet.com/ • Feedback Module Description • the external enclosure (2 seals, see Figure 10 and Figure 11). The FortiGate-200D uses one seal to secure the external enclosure (see Figure 9), The FortiGate-300C uses 2 red seals to secure: • the external enclosure (2 seals, see Figure 12 and Figure 13). The FortiGate-600C and 800C use 3 red seals to secure: • the external enclosure, the power supply and the blank faceplate for the redundant power supply (see Figure 14). Figure 8: FortiGate-60C-PoE external enclosure seal, bottom, right side Figure 9: FortiGate-100D external enclosure seal, top, rear FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 18 http://docs.fortinet.com/ • Feedback Module Description Figure 10: FortiGate-200B external enclosure seal, bottom, left side Figure 11: FortiGate-200D external enclosure seal, top, rear FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 19 http://docs.fortinet.com/ • Feedback Module Description Figure 12: FortiGate-300C external enclosure seal, top, left side Figure 13: FortiGate-300C external enclosure seal, top, right side FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 20 http://docs.fortinet.com/ • Feedback Module Description Figure 14: FortiGate-600C and 800C seals, bottom, rear Operational Environment The module consists of the combination of the FortiOS operating system and the FortiGate appliances. The FortiOS operating system can only be installed, and run, on a FortiGate appliance. The FortiOS operating system provides a proprietary and non- modifiable operating system. Cryptographic Key Management Random Number Generation The modules use a firmware based, deterministic random bit generator (DRBG) that conforms to NIST Special Publication 800-90A. The module generates cryptographic keys whose strengths are modified by available entropy. There is no assurance of the minimum strength of generated keys. Entropy Token The modules use an entropy token to seed the DRBG during the module’s boot process and to periodically reseed the DRBG. The entropy token is not included in the boundary of the module and therefore no assurance can be made for the correct operation of the entropy token nor is there a guarantee of stated entropy. The default reseed period is once every 24 hours (1440 minutes). The token must be installed to complete the boot process and to reseed of the DRBG. The entropy token is responsible for loading a minimum of 256 bits of entropy. Key Zeroization The zeroization process must performed under the direct control of the operator. The operator must be present to observe that the zeroization method has completed successfully. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 21 http://docs.fortinet.com/ • Feedback Module Description All keys except the following are zeroized by executing a factory reset: • Firmware Update Key • Firmware Integrity Key • Configuration Integrity Key • Configuration Backup Key • SSH Server/Host Key • HTTPS/TLS Server/Host Key All keys and CSPs are zeroized by formatting the modules’ flash memory storage. To format the flash memory, connect a computer to the modules’ console port and reboot the module. Access the configuration menu by pressing any key when prompted (see example below). Select “F” to format the flash memory (boot device). Press any key to display configuration menu... [G]: Get firmware image from TFTP server. [F]: Format boot device. [B]: Boot with backup firmware and set as default. [I]: Configuration and information. [Q]: Quit menu and continue to boot with default firmware. [H]: Display this list of options. Enter G,F,B,I,Q,or H: Algorithms Table 16: FIPS Approved Algorithms Algorithm NIST Certificate Number DRBG (NIST SP 800-90A) with AES 256 bit keys 652 Triple-DES in CBC mode with 168-bits 1804, 1806, 1807, 1808 AES in CBC mode (128-, 192-, 256-bits) 3166, 3168, 3169, 3171 SHA-1 2619, 2621, 2622, 2624 SHA-256 2619, 2621, 2622, 2624 HMAC SHA-1 1994, 1996, 1997, 1999 HMAC SHA-256 1994, 1966, 1997, 1999 RSA PKCS1 1604, 1606,1607 - Signature Generation: 2048 and 3072-bit - Signature Verification: 1024, 2048 and 3072-bit CVL (IKE v1) Triple-DES (168 bits - three key Triple 415 DES only), AES (128/256 bits) CVL (IKE v2) (224-, 8192- key size) 415 CVL (SSH) with TDES-, AES128-, AES256-CBC (using 416 SHA1) CVL (TLS) - TLS1.0/1.1 and TLS1.2 (using SHA 256) 416 FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 22 http://docs.fortinet.com/ • Feedback Module Description Table 17: FIPS Allowed Algorithms Algorithm RSA (key wrapping; key establishment methodology provides 112 or 132 bits of encryption strength; non-compliant less than 112-bits of encryption strength) Diffie-Hellman (key agreement; key establishment methodology provides between 112 and 201 bits of encryption strength; non-compliant less than 112-bits of encryption strength) Table 18: Non-FIPS Approved Algorithms Algorithm DES (disabled in FIPS-CC mode) MD5 (disabled in FIPS-CC mode) HMAC MD5 (disabled in FIPS-CC mode) NDRNG Note that the IKE, SSH and TLS protocols have not been tested by the CMVP or CAVP. Cryptographic Keys and Critical Security Parameters The following table lists all of the cryptographic keys and critical security parameters used by the module. The following definitions apply to the table: Key or CSP The key or CSP description. Storage Where and how the keys are stored Usage How the keys are used Zeroization The key zeroization method Table 19: Cryptographic Keys and Critical Parameters used in FIPS-CC Mode Key or CSP Storage Usage Zeroization Diffie-Hellman Keys SDRAM Key agreement and key By formatting the flash establishment memory storage or by Plaintext executing a factory reset IPSec Manual Flash RAM Used as IPSec Session By formatting the flash Authentication Key Authentication Key memory storage or by AES encrypted executing a factory reset IPSec Manual Encryption Flash RAM Used as IPSec Session By formatting the flash Key Encryption Key memory storage or by AES encrypted executing a factory reset IPSec Session SDRAM IPSec peer-to-peer By formatting the flash Authentication Key authentication using HMAC memory storage or by Plain-text SHA-1 or HMAC SHA-256 executing a factory reset IPSec Session Encryption SDRAM VPN traffic By formatting the flash Key encryption/decryption using memory storage or by Plain-text Triple-DES or AES executing a factory reset FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 23 http://docs.fortinet.com/ • Feedback Module Description Table 19: Cryptographic Keys and Critical Parameters used in FIPS-CC Mode Key or CSP Storage Usage Zeroization IKE Pre-Shared Key Flash RAM Used to generate IKE By formatting the flash protocol keys memory storage or by AES encrypted executing a factory reset IKE Authentication Key SDRAM IKE peer-to-peer By formatting the flash authentication using HMAC memory storage or by Plain-text SHA-1 or HMAC SHA-256 executing a factory (SKEYID_A) reset IKE Key Generation Key SDRAM IPSec SA keying material By formatting the flash (SKEYID_D) memory storage or by Plain-text executing a factory reset IKE Session Encryption SDRAM Encryption of IKE peer-to- By formatting the flash Key peer key negotiation using memory storage or by Plain-text Triple-DES or AES executing a factory (SKEYID_E) reset IKE RSA Key Flash Ram Used to generate IKE By formatting the flash protocol keys memory storage or by Plain text executing a factory reset NDRBG input string Flash RAM Entropy input string for the By formatting the flash NDRBG (output from memory storage or by Plain-text TRNG) executing a factory reset DRBG seed Flash RAM Seed used by the DRBG By formatting the flash (output from NDRNG) memory storage or by Plain-text executing a factory reset DRBG output Flash RAM Random numbers used in By formatting the flash cryptographic algorithms memory storage or by Plain-text executing a factory reset DRBG v and key values Flash Ram Internal state values for the By formatting the flash DRBG memory storage or by Plain-text executing a factory reset Firmware Update Key Flash RAM Verification of firmware By formatting the flash integrity when updating to memory storage Plain-text new firmware versions using RSA public key (firmware load test) Firmware Integrity Key Flash RAM Verification of firmware By formatting the flash integrity in the firmware memory storage Plain-text integrity test using RSA public key (firmware integrity test) HTTPS/TLS Server/Host Flash RAM RSA private key used in the By formatting the flash Key HTTPS/TLS protocols (key memory storage Plain-text establishment) HTTPS/TLS Session SDRAM HMAC SHA-1 or HMAC By formatting the flash Authentication Key SHA-256 key used for memory storage or by Plain-text HTTPS/TLS session executing a factory authentication reset HTTPS/TLS Session SDRAM AES or Triple-DES key By formatting the flash Encryption Key used for HTTPS/TLS memory storage or by Plain-text session encryption executing a factory reset FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 24 http://docs.fortinet.com/ • Feedback Module Description Table 19: Cryptographic Keys and Critical Parameters used in FIPS-CC Mode Key or CSP Storage Usage Zeroization SSH Server/Host Key Flash RAM RSA private key used in the By formatting the flash SSH protocol (key memory storage Plain-text establishment) SSH Session SDRAM HMAC SHA-1 key used for By formatting the flash Authentication Key SSH session authentication memory storage or by Plain-text executing a factory reset SSH Session Encryption SDRAM AES or Triple-DES key By formatting the flash Key used for SSH session memory storage or by Plain-text encryption executing a factory reset Operator Password Flash RAM Used to authenticate By formatting the flash operator access to the memory storage or by SHA-1 hash module executing a factory reset Configuration Integrity Flash RAM HMAC SHA-256 hash used By formatting the flash Key for configuration/VPN memory storage Plain-text bypass test Configuration Encryption Flash RAM AES key used to encrypt By formatting the flash Key CSPs on the flash RAM memory storage Plain-text and in the backup configuration file (except for operator passwords in the backup configuration file) Configuration Backup Key Flash RAM HMAC SHA-256 key used By formatting the flash to encrypt operator memory storage or by Plain-text passwords in the backup executing a factory configuration file reset Network User Password Flash RAM Used during network user By formatting the flash authentication memory storage or by AES encrypted executing a factory reset HA Password Flash RAM Used to authenticate By formatting the flash FortiGate units in an HA memory storage or by AES encrypted cluster executing a factory reset HA Encryption Key Flash RAM Encryption of traffic By formatting the flash between units in an HA memory storage or by AES encrypted cluster using AES executing a factory reset Alternating Bypass Feature The primary cryptographic function of the module is as a firewall and VPN device. The module implements two forms of alternating bypass for VPN traffic: policy based (for IPSec and SSL VPN) and interface based (for IPSec VPN only). Policy Based VPN Firewall policies with an action of IPSec or SSL-VPN mean that the firewall is functioning as a VPN start/end point for the specified source/destination addresses and will encrypt/decrypt traffic according to the policy. Firewall policies with an action of allow mean that the firewall is accepting/sending plaintext data for the specified source/destination addresses. A firewall policy with an action of accept means that the module is operating in a bypass state for that policy. A firewall policy with an action of IPSec or SSL-VPN means that the module is operating in a non-bypass state for that policy. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 25 http://docs.fortinet.com/ • Feedback Module Description Interface Based VPN Interface based VPN is supported for IPSec only. A virtual interface is created and any traffic routed to the virtual interface is encrypted and sent to the VPN peer. Traffic received from the peer is decrypted. Traffic through the virtual interface is controlled using firewall policies. However, unlike policy based VPN, the action is restricted to Accept or Deny and all traffic controlled by the policy is encrypted/decrypted. When traffic is routed over the non-virtual interfaced, the module is operating in a bypass state. When traffic is routed over the virtual interface, the module is operating in a non- bypass state. In both cases, two independent actions must be taken by a CO to create bypass firewall policies: the CO must create the bypass policy and then specifically enable that policy. Key Archiving The module supports key archiving to a management computer or USB token as part of a module configuration file backup. Operator entered keys are archived as part of the module configuration file. The configuration file is stored in plain text, but keys in the configuration file are either AES encrypted using the Configuration Encryption Key or stored as a keyed hash using HMAC-SHA-1 using the Configuration Backup Key. Electromagnetic Interference/Electromagnetic Compatibility (EMI/EMC) The modules comply with EMI/EMC requirements for Class A or B devices as specified by Part 15, Subpart B, of the FCC rules. The following table lists the specific lab and report information for the modules. Table 20: FCC Report Information Module Lab Information FCC Report Number FG-100D Bay Area Compliance Laboratories Corp. R1111281 1274 Anvilwood Ave. Sunnyvale, CA 94089 (408) 732-9162 FG-200B Spectrum Research and Testing Laboratory, FCBA09120101 Inc No. 101-10, Ling 8 Shan-Tong Li Chung-Li City Taoyuan, Taiwan 03-498-7684 03-498-6528 FG-200D Spectrum Research and Testing Laboratory, FCAA12121701A-01 Inc No. 101-10, Ling 8 Shan-Tong Li Chung-Li City Taoyuan, Taiwan 03-498-7684 03-498-6528 FG-300C The module is declared to conform with EMI/EMC requirements for Class B devices as specified by Part 15, Subpart B, of the FCC rules. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 26 http://docs.fortinet.com/ • Feedback Mitigation of Other Attacks Table 20: FCC Report Information Module Lab Information FCC Report Number FG-600C The module is declared to conform with EMI/EMC requirements for Class B devices as specified by Part 15, Subpart B, of the FCC rules. FG-800C The module is declared to conform with EMI/EMC requirements for Class A devices as specified by Part 15, Subpart B, of the FCC rules. Mitigation of Other Attacks The module includes a real-time Intrusion Prevention System (IPS) as well as antivirus protection, antispam and content filtering. Use of these capabilities is optional. The FortiOS IPS has two components: a signature based component for detecting attacks passing through the FortiGate appliance and a local attack detection component that protects the firewall from direct attacks. Functionally, signatures are similar to virus definitions, with each signature designed to detect a particular type of attack. The IPS signatures are updated through the FortiGuard IPS service. The IPS engine can also be updated through the FortiGuard IPS service. FortiOS antivirus protection removes and optionally quarantines files infected by viruses from web (HTTP), file transfer (FTP), and email (POP3, IMAP, and SMTP) content as it passes through the FortiGate modules. FortiOS antivirus protection also controls the blocking of oversized files and supports blocking by file extension. Virus signatures are updated through the FortiGuard antivirus service. The antivirus engine can also be updated through the FortiGuard antivirus service. FortiOS antispam protection tags (SMTP, IMAP, POP3) or discards (SMTP only) email messages determined to be spam. Multiple spam detection methods are supported including the FortiGuard managed antispam service. FortiOS web filtering can be configured to provide web (HTTP) content filtering. FortiOS web filtering uses methods such as banned words, address block/exempt lists, and the FortiGuard managed content service. Whenever a IPS, antivirus, antispam or filtering event occurs, the modules can record the event in the log and/or send an alert email to an operator. For complete information refer to the FortiGate Installation Guide for the specific module in question, the FortiGate Administration Guide and the FortiGate IPS Guide. FIPS 140-2 Compliant Operation FIPS 140-2 compliant operation requires both that you use the module in its FIPS-CC mode of operation and that you follow secure procedures for installation and operation of the FortiGate unit. You must ensure that: • The FortiGate unit is configured in the FIPS-CC mode of operation. • The FortiGate unit is installed in a secure physical location. • The entropy token is installed and enabled. • Physical access to the FortiGate unit is restricted to authorized operators. • Administrative passwords are at least 8 characters long. FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 27 http://docs.fortinet.com/ • Feedback Self-Tests • Administrative passwords are changed regularly. • Administrator account passwords must have the following characteristics: • One (or more) of the characters must be capitalized • One (or more) of the characters must be numeric • One (or more) of the characters must be non alpha-numeric (e.g. punctuation mark) • Administration of the module is permitted using only validated administrative methods. These are: • Console connection • Web-based manager via HTTPS • Command line interface (CLI) access via SSH • Diffie-Hellman groups of less than less than 2048 bits are not used. • Client side RSA certificates must use 2048 bit or greater key sizes. • Only approved and allowed algorithms are used (see “Algorithms” on page 22). The module can be used in either of its two operation modes: NAT/Route or Transparent. NAT/Route mode applies security features between two or more different networks (for example, between a private network and the Internet). Transparent mode applies security features at any point in a network. The current operation mode is displayed on the web- based manager Status page and in the output of the get system status CLI command. Enabling FIPS-CC mode To enable the FIPS 140-2 compliant mode of operation, the operator must execute the following command from the Local Console: config system fips-cc set entropy-token enable set status enable end The Operator is required to supply a password for the admin account which will be assigned to the Crypto Officer role. The supplied password must be at least 8 characters long and correctly verified before the system will restart in FIPS-CC mode. Upon restart, the module will execute self-tests to ensure the correct initialization of the module’s cryptographic functions. After restarting, the Crypto Officer can confirm that the module is running in FIPS-CC mode by executing the following command from the CLI: get system status If the module is running in FIPS-CC mode, the system status output will display the line: FIPS-CC mode: enable Note that enabling/disabling the FIPS-CC mode of operation will automatically invoke the key zeroization service. The key zeroization is performed immediately after FIPS-CC mode is enabled/disabled. Self-Tests The module executes the following self-tests during startup and initialization: • Firmware integrity test using RSA signatures FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 28 http://docs.fortinet.com/ • Feedback Non-FIPS Approved Services • Configuration/VPN bypass test using HMAC SHA-1 • Triple-DES, CBC mode, encrypt known answer test • Triple-DES, CBC mode, decrypt known answer test • AES, CBC mode, encrypt known answer test • AES, CBC mode, decrypt known answer test • HMAC SHA-1 known answer test • SHA-1 known answer test (test as part of HMAC SHA-1 known answer test) • HMAC SHA-256 known answer test • SHA-256 known answer test (test as part of HMAC SHA-256 known answer test) • RSA signature generation known answer test • RSA signature verification known answer test • DRBG known answer test The results of the startup self-tests are displayed on the console during the startup process. The startup self-tests can also be initiated on demand using the CLI command execute fips kat all (to initiate all self-tests) or execute fips kat (to initiate a specific self-test). When the self-tests are run, each implementation of an algorithm is tested - e.g. when the AES self-test is run, all AES implementations are tested. The module executes the following conditional tests when the related service is invoked: • Continuous TRNG test • Continuous NDRNG test • Continuous DRBG test • RSA pairwise consistency test • Configuration/VPN bypass test using HMAC SHA-1 • Firmware load test using RSA signatures If any of the self-tests or conditional tests fail, the module enters an error state as shown by the console output below: Self-tests failed Entering error mode... The system is going down NOW !! The system is halted. All data output and cryptographic services are inhibited in the error state. Non-FIPS Approved Services The module also provides the following non-FIPS approved services: • Configuration backups using password protection • LLTP and PPTP VPN Services marked with an asterisk (*) in Table 14 and Table 15 are considered non- approved when using the following algorithms: • Non-compliant-strength Diffie-Hellman • Non-compliant-strength RSA key wrapping FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 29 http://docs.fortinet.com/ • Feedback Non-FIPS Approved Services • DES • HMAC-MD5 FortiGate-100D/200B/200D/300C/600C/800C FIPS 140-2 Security Policy 01-505-211975-20130706 30 http://docs.fortinet.com/ • Feedback