Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Security Level 2 Rev. 0.9 – November 12, 2012 Seagate Technology, LLC Page 1 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 Table of Contents 1  Introduction ...................................................................................................................................................................... 3  1.1  Scope ........................................................................................................................................................................ 3  1.2  Security Levels ......................................................................................................................................................... 3  1.3  References ................................................................................................................................................................ 3  1.4  Acronyms ................................................................................................................................................................. 3  2  Cryptographic Module Description ................................................................................................................................. 5  2.1  Overview .................................................................................................................................................................. 5  2.2  Logical to Physical Port Mapping ........................................................................................................................... 5  2.3  Product Versions ...................................................................................................................................................... 5  2.4  FIPS Approved Algorithms ..................................................................................................................................... 5  2.5  Self-Tests .................................................................................................................................................................. 5  2.6  FIPS 140 Approved Mode of Operation.................................................................................................................. 6  2.6.1  TCG Security Mode ......................................................................................................................................... 6  2.6.2  Entering FIPS Approved Mode of Operation.................................................................................................. 6  2.7  User Data Cryptographic Erase Methods ................................................................................................................ 6  2.8  Revert-SP Method .................................................................................................................................................... 7  2.9  Show Status .............................................................................................................................................................. 7  3  Identification and Authentication (I&A) Policy .............................................................................................................. 8  3.1  Operator Roles.......................................................................................................................................................... 8  3.1.1  Crypto Officer Roles ........................................................................................................................................ 8  3.1.2  User Roles ........................................................................................................................................................ 8  3.1.3  Unauthenticated Role ....................................................................................................................................... 8  3.2  Authentication .......................................................................................................................................................... 8  3.2.1  Authentication Types ....................................................................................................................................... 8  3.2.2  Authentication in TCG Security Mode............................................................................................................ 8  3.2.3  Authentication Mechanism, Data and Strength ............................................................................................... 9  3.2.4  Personalizing Authentication Data .................................................................................................................. 9  4  Access Control Policy .................................................................................................................................................... 10  4.1  Services................................................................................................................................................................... 10  4.2  Cryptographic Keys and CSPs ............................................................................................................................... 12  4.3  Non-Critical Security Parameters .......................................................................................................................... 14  5  Physical Security ............................................................................................................................................................ 14  5.1  Mechanisms ............................................................................................................................................................ 14  5.2  Operator Requirements .......................................................................................................................................... 15  6  Operational Environment ............................................................................................................................................... 16  7  Security Rules................................................................................................................................................................. 16  7.1  Secure Initialization ............................................................................................................................................... 16  7.2  Ongoing Policy Restrictions .................................................................................................................................. 16  8  Mitigation of Other Attacks Policy ................................................................................................................................ 16  Table of Figures Figure 1: Top view of tamper-evidence label on sides of drive ............................................................................................ 14  Figure 2: Left-side view of tamper-evidence label on left side of drive ............................................................................... 15  Figure 3: Right-side view of tamper-evidence label on right side of drive .......................................................................... 15  Page 2 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 1 Introduction 1.1 Scope This security policy applies to the FIPS 140-2 Cryptographic Module (CM) embedded in Seagate Secure® TCG Enterprise SSC Pulsar.2 SSD Self-Encrypting Drive products. This document meets the requirements of the FIPS 140-2 standard (Appendix C) and Implementation Guidance (section 14.1). It does not provide interface details needed to develop a compliant application. This document is non-proprietary and may be reproduced in its original entirety. 1.2 Security Levels FIPS 140-2 Requirement Area Security Level Cryptographic Module Specification 2 Cryptographic Module Ports and Interfaces 2 Roles, Services and Authentication 2 Finite State Model 2 Physical Security 2 Operational Environment N/A Cryptographic Key Management 2 Electromagnetic Interface / Electromagnetic Compatibility (EMI / EMC) 3 Self – tests 2 Design Assurance 2 Mitigation of Other Attacks N/A The overall security level pursued for the cryptographic modules is Security Level 2. 1.3 References 1. FIPS PUB 140-2 2. Derived Test Requirements for FIPS PUB 140-2 3. Implementation Guidance for FIPS PUB 140-2 and the Cryptographic Module Validation Program 4. TCG Storage Security Subsystem Class: Enterprise, Specification Version 1.0, Revision 3.00, January 10, 2011 5. TCG Storage Architecture Core Specification, Specification Version 1.0, Revision 0.9, May 24, 2007 6. TCG Storage Interface Interactions Specification, Specification Version 1.0, 7. SCSI Primary Commands-4 Rev 15 (SPC-4) 8. SCSI Block Commands Rev15 (SBC-3) 9. Serial Attached SCSI-2 Rev 13 (SAS-2) 1.4 Acronyms AES Advanced Encryption Standard (FIPS 197) CBC Cipher Block Chaining, an operational mode of AES CM Cryptographic Module CO Crypto-officer CSP Critical Security Parameter CSPSK Critical Security Parameter Sanitization Key DRBG Deterministic Random Bit Generator MEK Media Encryption Key FIPS 140 FIPS 140-2 HDD Hard Disk Drive IV Initialization Vector for encryption operation LBA Logical Block Address LED Light Emitting Device Page 3 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 MSID Manufactured SID, public drive-unique value that is used as default PIN, TCG term NDRNG Non-Deterministic Random Number Generator POR Power-on Reset (power cycle) POST Power on Self-Test PSID Physical SID, public drive-unique value RNG Random Number Generator SED Self-Encrypting Drive, Seagate HDD/SSD products that provide HW data encryption. SID Secure ID, PIN for Drive Owner CO role, TCG term SoC System-on-a-Chip SP Security Provider or Security Partition (TCG), also Security Policy (FIPS 140) SSD Solid State Drives Page 4 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 2 Cryptographic Module Description 2.1 Overview The Seagate Secure® TCG Enterprise SSC Self-Encrypting Drive FIPS 140 Module is embodied in Seagate Pulsar.2 SSD SED model disk drives. These products meet the performance requirements of the most demanding Enterprise applications. The cryptographic module (CM) provides a wide range of cryptographic services using FIPS approved algorithms. Services include hardware-based data encryption, instantaneous user data disposal with cryptographic erase, independently controlled and protected user data LBA bands and authenticated FW download. The services are provided through industry-standard TCG Enterprise SSC, SCSI protocols. The CM has a multiple-chip embedded physical embodiment. The physical interface to the CM is a SAS connector. The logical interfaces are the industry-standard SCSI (refer to Section1.3, items 7 & 8), TCG SWG (refer to Section1.3, item 5), and Enterprise (refer to Section1.3, item 4) protocols, carried on the SAS (refer to Section1.3, item 9) transport interface. The primary function of the module is to provide data encryption, access control and cryptographic erase of the data stored on the flash drive media. The human operator of the drive product interfaces with the CM through a “host” application on a host system. 2.2 Logical to Physical Port Mapping FIPS 140-2 Interface Module Ports Data Input SAS Connector Data Output SAS Connector Control Input SAS Connector Status Output SAS Connector, LED Power Input Power Connector 2.3 Product Versions The following models and hardware versions (PNs) are validated with the following FW versions: • Pulsar.2, 2.5-Inch, SAS Interface, 800 GB o 800 GB: 1BU282 o FW Versions: 0003 2.4 FIPS Approved Algorithms Algorithm Certificate Number ASIC AES #1811 Firmware AES #1343 RSA #650 SHA #1225 800-90 DRBG #62 2.5 Self-Tests Function Tested Self-Test Type Implementation Failure Behavior ASIC AES Power-On Encrypt and Decrypt KAT performed Enters FIPS Self Test Error State Firmware AES Power-On Encrypt and Decrypt KAT performed Enters FIPS Self Test Error State RSA Power-On Sign Verify KAT performed. Enters FIPS Self Test Error State Page 5 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 SHA-1 Power-On Digest KAT performed Enters FIPS Self Test Error State SHA-256 Power-On Digest KAT performed Enters FIPS Self Test Error State 800-90 DRBG Power-On DRBG KAT performed Enters FIPS Self Test Error State Firmware Integrity Power-On 16-bit CRC and ECC Enters FW Integrity Error State Check Firmware Load Conditional: When RSA PKCS#1 signature verification of Firmware download is aborted. Check new firmware is new firmware image is done before it downloaded can be loaded. 800-90 DRBG Conditional: When Newly generated random number is Enters FIPS Self Test Error State. a random number compared to the previously generated is generated random number. Test fails if they are equal. Non-Approved Conditional: When Newly generated random number is Enters FIPS Self Test Error State. NDRNG a non-Approved compared to the previously generated random number is random number. Test fails if they are generated equal. 2.6 FIPS 140 Approved Mode of Operation Before the operator performs Secure Initialization steps detailed in Section 7.1, the drive will operate in a non-FIPS compliant mode. There is 1 approved mode of operation, “TCG Security”. The module’s FIPS mode of operation is enforced through configuration and policy. Violating these ongoing policy restrictions (detailed in Section 7.2) would mean that one is no longer using the drive in a FIPS compliant mode of operation. The operator can determine if the CM is operating in a FIPS approved mode by invoking the Show Status service (refer to Section 4.1). TCG Security Mode 2.6.1 This mode has the capability to have multiple Users with independent access control to read/write/crypto erase independent data areas (LBA ranges). Note that by default there is a single “Global Range” that encompasses the whole user data area which is the starting point from which multiple Users request their independent data areas. In addition to the Drive Owner and User(s) roles, this mode implements a CO role (EraseMaster) to administer the above capability. Entering FIPS Approved Mode of Operation 2.6.2 After the module is installed and configured per the Security Rules of this policy in Section 7.1, the drive is always in the Approved mode of operation except when a critical failure has been detected, causing a transition to a “Failed” state. In some of these exit scenarios (e.g. repeated POST failure), the drive cannot be restored to FIPS mode and does not provide any FIPS services. 2.7 User Data Cryptographic Erase Methods Since all user data is encrypted / decrypted by the CM for storage on / retrieval from the drive media, the data can be erased using cryptographic methods. The data is erased by zeroizing the Media Encryption Key (MEK). Other FIPS services can be used to erase all the other private keys and CSPs (see Section 2.8). Page 6 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 2.8 Revert-SP Method The TCG Revert-SP method may be invoked to transition the CM back to the manufactured state (uninitialized). This corresponds to the Exit FIPS Mode service and is akin to a “restore to factory defaults” operation. This operation also provides a means to zeroize keys and CSPs. Subsequently, the CM has to be re-initialized before it can return to a FIPS compliant mode of operation. This Revert-SP method is invoked as an unauthenticated service by virtue of the use of a public credential (PSID). 2.9 Show Status Show status service can be used to determine if the drive is operational under the security constraints of FIPS. For this purpose TCG Level 0 Discovery mechanism is utilized.TCG Level 0 Discovery mechanism maybe invoked by the operator to know if drive is in “use” or security “fail” state. If the Drive Security Life Cycle State is 0x80 then drive is in Use State i.e. security is operational. If the Drive Security Life Cycle State is 0xFF the drive is in security Fail State i.e. drive is not operational in terms of FIPS services. The LED indicates the drive is powered on. Drive activity is indicated by blinking of the LED. No other status is indicated through LED. Page 7 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 3 Identification and Authentication (I&A) Policy 3.1 Operator Roles Note: The following identifies the CO and User roles with a general description of the purposes. For further details of the services performed by each role in each FIPS mode, see section 4.1. 3.1.1 Crypto Officer Roles 3.1.1.1 Drive Owner This CO role corresponds to the SID (Secure ID) Authority on the Admin SP as defined in Enterprise SSC [4]. This role is used to download a new FW image. Note: only a FIPS validated firmware version can be loaded to the module. Otherwise, the module is not operating in FIPS mode. 3.1.1.2 EraseMaster (TCG Security Mode) This CO role corresponds to the same named role as defined in Enterprise SSC [refer to Section1.3, item 4]. This role is used to enable/disable User roles, and erase the user data region (LBA band). An operator is authenticated to this role with role-based authentication. 3.1.2 User Roles 3.1.2.1 BandMasters (0-15) (TCG Security Mode) This user role corresponds to the same named role as defined in Enterprise SSC [refer to Section1.3, item 4]. This role is used to lock/unlock and configure a user data band (“LBA band”) for read/write access. A CM can be configured to support up to 16 user data bands, which are controlled by their respective BandMaster credentials. By default 2 user bands are enabled. BandMasters are enabled/disabled using the EraseMaster role. An operator is authenticated to the BandMaster role with identity-based authentication. If a user data band is erased (EraseMaster service) then the BandMaster PIN is reset to MSID. 3.1.3 Unauthenticated Role This role can perform the Show Status service. If the operator has physical access to the drive, this role can also reset the module with a power cycle (which results in POSTs). This role can also use the public PSID value to invoke the Exit FIPS Mode service. See section 4.1 for details. 3.2 Authentication Authentication Types 3.2.1 Some operator roles have role-based authentication and others have identity-based authentication. For example, the Drive Owner role uses role-based authentication as there is only one ID and one PIN. In TCG Security Mode, the CM has up to 16 User operators. Each of these operators is assigned a unique ID to which a PIN is associated, thus this provides identity-based authentication. For some services the authentication is performed in a separate associated service; e.g. the Read Unlock service is the authentication for subsequent User Data Read service. If the User Data Read service is attempted without prior authentication then the command will fail. The module has been tested for Security Level 2 compliance in accordance to FIPS 140-2 Standard. Authentication in TCG Security Mode 3.2.2 Operator authentication is provided within a TCG session. The host application can have only a single session open at a time. Authentication of an operator, using the TCG interface, uses the Authenticate method to authenticate to a role after a session has been started. Authentications will persist until the session is closed. Page 8 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 During a session the application can invoke services for which the authenticated operator has access control. Note that a security rule of the CM is that the host must not authenticate to more than one operator (TCG authority) in a session. For the Show Status the host application will authenticate to the “Anybody” authority which does not have a private credential. Therefore this operation is effectively an unauthenticated service. Authentication Mechanism, Data and Strength 3.2.3 Operator authentication with PINs is implemented by hashing the operator input value and comparing it to the stored hash of the assigned PIN. The PINs have a retry attribute (“TryLimit”) that controls the number of unsuccessful attempts before the authentication is blocked. The PINs have a maximum length of 32 bytes. Per the policy security rules, the minimum PIN length is 4 bytes (Rule 2 in Section 7.1). This gives a probability of 1/232 of guessing the PIN in a single random attempt. This easily meets the FIPS 140 authentication strength requirements of less than 1/1,000,000. In TCG interface, each failed authentication attempt takes a minimum of 15ms to complete. Thus a maximum of {(60*1000)/15} attempts can be processed in one minute. Thus the probability of multiple random attempts to succeed in one minute is 4000/232. This is significantly lower than the FIPS requirement of 1/100,000. Personalizing Authentication Data 3.2.4 The initial value for SID and various other PINs is a manufactured value (MSID). This is a device-unique, 32-byte, public value. The Security Rules (Section 7) for the CM requires that the PIN values must be “personalized” to private values using the “Set PIN” service. Page 9 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 4 Access Control Policy 4.1 Services The following tables represent the FIPS 140 services for each FIPS Approved Mode in terms of the Approved Security Functions and operator access control. Note the following: • Use of the services described below is only compliant if the module is in the noted Approved mode. • Underlying security functions used by higher level algorithms are not represented (e.g. hashing as part of asymmetric key) • Operator authentication is not represented in this table. • Some security functions listed are used solely to protect / encrypt keys and CSPs. • Service input and output details are defined by the TCG and SCSI standards. • Unauthenticated services (e.g. Show Status) do not provide access to private keys or CSPs. • * Some services have indirect access control provided through enable / disable or lock / unlock services used by an authenticated operator; e.g. User data read / write. Page 10 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 Table 1.1 - FIPS 140 Authenticated Services (TCG Security Mode) Service Name Description Operator Security Command(s)/Event(s) Access Function Control Set PIN Change operator authentication data. EraseMaster, Hashing TCG Set Method BandMasters, Drive Owner Lock / Unlock Enable / Disable FW Download Drive Owner None TCG Set Method FW Download Service Port Firmware Load complete firmware image. If the None** Asymmetric SCSI Write Buffer Download self-test of the code load passes then Key the device will run with the new code. Enable / Disable Enable / Disable a User Authority. EraseMaster None TCG Set Method BandMasters Set Range Set the location, size, and locking BandMasters None TCG Set Method Attributes attributes of the LBA range. Lock / Unlock Block or allow read (decrypt) / write BandMasters None TCG Set Method User Data Range (encrypt) of user data in a range. for Read and/or Write User Data Read / Encryption / decryption of user data None* Symmetric SCSI Read, Write Commands Write to/from a LBA range. Key Access control to this service is provided through Lock / Unlock User Data Range. Cryptographic Erase user data in an LBA range by EraseMaster, RNG, TCG Erase Method Erase cryptographic means: changing the Symmetric Media encryption key (MEK). Key BandMaster PIN is also reset. Table 1.2 - FIPS 140 Unauthenticated Services (TCG Security Mode) Service Name Description Operator Security Command(s)/Event(s) Access Function Control Show Status Reports if the CM is None None TCG Level 0 Discovery • operational in terms of FIPS services. Reset Module Runs POSTs and zeroizes key & CSP in None None POR RAM. DRBG Generate Returns an SP 800-90 DRBG Random None None TCG Random() Bytes Number of 256 bytes Exit FIPS Mode Exit Approved Mode of Operation. None (using None TCG AdminSP.RevertSP() Note: CM will enter non-FIPS mode. PSID) *Security has to be Unlocked **FW Download Port has to be Unlocked Page 11 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 4.2 Cryptographic Keys and CSPs The following table defines the keys / CSPs and the operators / services which use them. Note the following: • The use of PIN CSPs for authentication is implied by the operator access control. • The Set PIN service is represented in this table even though generally it is only used at module setup. • All non-volatile storage of keys and CSPs is in the system area of the drive media to which there is no logical or physical access from outside of the module. • The module uses SP 800-90 DRBG and adopts Hash_DRBG mechanism. • Non-critical security parameters are not represented in this table. • Read access of private values are internal only to the CM and are thus not represented in this table. • There is no security-relevant audit feature. Page 12 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 Table 3 – “Key Management” Type (Pub / Priv, Name Description key / CSP (e.g. Operator Role Services Used In Access **(W, X) Zeroization PIN)), size SID (Secure ID), aka Private, PIN, 32 Revert SP Auth. Data Drive Owner Set PIN W Drive Owner PIN bytes Private, PIN, 32 Revert SP EraseMaster EraseMaster Auth Data EraseMaster SetPIN W bytes BandMaster 0-15 Private, PIN, 32 Revert SP Users Auth. Data BandMasters Set PIN W Passwords bytes Private, AES Key, Revert SP, LBA Range MEKs MEK (per LBA band) Users Unlock User Data X 256 bits Cryptographic Erase *Input to a DRBG mechanism of a Services which use the RNG Reset Entropy Input String Private, 72 bytes None X string of bits that contains entropy (e.g; cryptographic erase) *String of bits that is used as input Private, Hash seed, Services which use the RNG Seed None X Reset to a DRBG mechanism 96 bytes (e.g. cryptographic erase) *Collection of stored information Services which uses the RNG Reset Internal State Private, V and C None X about DRBG instantiation (e.g. cryptographic erase) Drive Owner Firmware Load Test Signature Public, RSA Key, None (Public) ORG 0-0 - ORG 0-3 (enable FW FW Download X Verify Key 2048 bits download) Revert SP, Critical Security Parameter Private, AES Key, CSPSKs None Set PIN X Cryptographic Erase Sanitization Keys 256 bits * Source: Section 4 Terms and Definitions of NIST Special Publication 800-90 ** W- Write access is allowed, X – Execute access is allowed Page 13 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 4.3 Non-Critical Security Parameters This section lists the security-related information which do not compromise the security of the module. • AES IV (i.e. Initialization Vector) The CM HW AES IV (CBC mode) is derived for each read/write operation. • PIN Retry Attributes – Tries, TryLimit and Persistence These parameters affect the handling of failed authentication attempts. • PSID (Physical SID) This public drive-unique value is only used for the TCG Revert Admin SP method (i.e. Exit FIPS Mode service). This method will leave the CM in a non FIPS compliant “factory default” mode and will require a re-initialization for the CM to resume operation in a FIPS compliant mode. • MSID (Manufactured SID) This drive-unique value is the manufactured default value for Drive Owner and Master roles. 5 Physical Security 5.1 Mechanisms The CM has the following physical security: • Production-grade components with standard passivation • Tamper-evident security labels applied by Seagate manufacturing prevent top and bottom cover removal for access or visibility to the media • Exterior of the drive is opaque • The tamper-evident labels cannot be penetrated or removed and reapplied without tamper-evidence • The tamper-evident labels cannot be easily replicated with a low attack time • Security label on sides of drive provide tamper-evidence of top and bottom cover removal Figure 1: Top view of tamper-evidence label on sides of drive Page 14 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 Figure 2: Left-side view of tamper-evidence label on left side of drive Figure 3: Right-side view of tamper-evidence label on right side of drive 5.2 Operator Requirements The operator is required to inspect the CM periodically for one or more of the following tamper evidence: • Checkerboard pattern on security label • Security label cutouts do not match original Checkerbox Pattern Tamper Evidence Upon discovery of tamper evidence, the module should be removed from service. Page 15 Seagate Secure® TCG Enterprise SSC Pulsar.2 Self-Encrypting Drive FIPS 140 Module Security Policy Rev. 0.9 6 Operational Environment The FIPS 140-2 Area 6 Operational Environment requirements are not applicable because the CM operates in a “non-modifiable operational environment”. That is, while the module is in operation the operational environment cannot be modified and no code can be added or deleted. FW can be upgraded (replaced) with a signed FW download operation. If the code download is successfully authenticated then the module will begin operating with the new code image. 7 Security Rules 7.1 Secure Initialization The following are the security rules for initialization and operation of the CM in a FIPS 140 compliant manner. Reference the appropriate sections of this document for details. 1. Users: At installation and periodically examine the physical security mechanisms for tamper evidence. 2. COs and Users: At installation, set all operator PINs applicable for the FIPS mode to private values of at least 4 bytes length: • TCG Security: Drive Owner, EraseMaster and BandMasters 3. Drive Owner: At installation, disable the “Makers” authority (defined in TCG Core Specification [refer to Section1.3, item 5]). 4. At installation, the value of LockOnReset (defined in TCG Core Specification [refer to Section1.3, item 5]) for FW Download must be set to “Power Cycle” and it must not be modified. 5. After secure initialization is complete, do a power-on reset to clear authentications established during initialization. 7.2 Ongoing Policy Restrictions 1. Prior to assuming a new role, close the current Session and start a new Session, or do a power-on reset, so that the previous authentication is cleared. 2. Users for TCG Security Mode: If it is intended to have a band lock on module reset then set ReadLockEnabled and WriteLockEnabled (defined in TCG Core Specification [5]) to “True”, the default value is “False”. If a band is configured with a value of False then the band is to be considered excluded from the module boundary. 8 Mitigation of Other Attacks Policy The CM does not make claims to mitigate against other attacks beyond the scope of FIPS 140-2. Page 16