FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) FIPS 140- 2 Non- Proprietary Security Policy Symantec Java Cryptographic Module (Version 1.0) Document Version 1.1 August 16, 2011 Document Version 1.1 © Symantec Corporation Page 1 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Prepared For: Prepared By: Symantec Corporation Apex Assurance Group, LLC 350 Ellis Street 530 Lytton Avenue, Ste. 200 Mountain View, CA 94043 Palo Alto, CA 94301 www.symantec.com www.apexassurance.com Abstract This document provides a non- proprietary FIPS 140- 2 Security Policy for the Java Cryptographic Module (Version 1.0). Document Version 1.1 © Symantec Corporation Page 2 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Table of Contents 1 Introduction .................................................................................................................................................. 5 1.1 About FIPS 140 ................................................................................................................................................ 5 1.2 About this Document ...................................................................................................................................... 5 1.3 External Resources .......................................................................................................................................... 5 1.4 Notices ............................................................................................................................................................ 5 1.5 Acronyms ........................................................................................................................................................ 5 2 Symantec Java Cryptographic Module (Version 1.0) ....................................................................................... 8 2.1 Cryptographic Module Specification ............................................................................................................... 8 2.1.1 Validation Level Detail ............................................................................................................................. 8 2.1.2 Approved Cryptographic Algorithms ....................................................................................................... 8 2.1.3 Non- Approved Cryptographic Algorithms ............................................................................................... 9 2.2 Module Interfaces ......................................................................................................................................... 10 2.3 Roles, Services, and Authentication .............................................................................................................. 11 2.3.1 Operator Services and Descriptions ...................................................................................................... 11 2.3.2 Operator Authentication ....................................................................................................................... 13 2.4 Physical Security ........................................................................................................................................... 13 2.5 Operational Environment ............................................................................................................................. 13 2.6 Cryptographic Key Management .................................................................................................................. 15 2.6.1 Key Generation ...................................................................................................................................... 16 2.6.2 Key Entry, Output, and Protection ........................................................................................................ 16 2.6.3 Key/CSP Storage and Zeroization .......................................................................................................... 16 2.7 Self- Tests ....................................................................................................................................................... 17 2.7.1 Power- On Self- Tests .............................................................................................................................. 17 2.7.2 Conditional Self- Tests ............................................................................................................................ 17 2.7.3 Critical Functions Tests .......................................................................................................................... 18 2.8 Mitigation of Other Attacks .......................................................................................................................... 18 3 Guidance and Secure Operation ................................................................................................................... 19 3.1 Initial Setup ................................................................................................................................................... 19 3.2 Crypto Officer Guidance ................................................................................................................................ 19 3.2.1 Software Packaging and OS Requirements ........................................................................................... 19 3.2.2 Enabling FIPS Mode ............................................................................................................................... 20 3.2.3 Management Procedures ...................................................................................................................... 20 3.2.4 Additional Rules of Operation ............................................................................................................... 20 3.3 User Guidance ............................................................................................................................................... 20 3.3.1 General Guidance .................................................................................................................................. 20 3.4 Role Changes ................................................................................................................................................ 21 3.5 Embedded Module Modes of Operation ....................................................................................................... 21 3.6 Embedded Module Random Number Generator .......................................................................................... 22 Document Version 1.1 © Symantec Corporation Page 3 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) List of Tables Table 1 – Acronyms and Terms ..................................................................................................................................... 7 Table 2 – Validation Level by DTR Section .................................................................................................................... 8 Table 3 – FIPS- Approved Algorithm Certificates ........................................................................................................... 9 Table 4 – Logical Interface / Physical Interface Mapping ........................................................................................... 11 Table 5 – Module Services and Descriptions .............................................................................................................. 13 Table 6 – Module Keys/CSPs ....................................................................................................................................... 16 Table 7 – Power- On Self- Tests .................................................................................................................................... 17 Table 8 – Conditional Self- Tests .................................................................................................................................. 18 Table 9 – Critical Functions Tests ................................................................................................................................ 18 Table 10 – Values in setMode to Change the Mode of Operation ............................................................................. 22 List of Figures Figure 1 – Module Boundary and Interfaces Diagram ................................................................................................ 10 Document Version 1.1 © Symantec Corporation Page 4 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) 1 Introduction 1.1 About FIPS 140 Federal Information Processing Standards Publication 140- 2 — Security Requirements for Cryptographic Modules specifies requirements for cryptographic modules to be deployed in a Sensitive but Unclassified environment. The National Institute of Standards and Technology (NIST) and Communications Security Establishment of Canada (CSEC) Cryptographic Module Validation Program (CMVP) runs the FIPS 140 program. The CMVP accredits independent testing labs to perform FIPS 140 testing; the CMVP also validates test reports for products meeting FIPS 140 validation. Validated is the term given to a product that is documented and tested against the FIPS 140 criteria. More information is available on the CMVP website at http://csrc.nist.gov/groups/STM/cmvp/index.html. 1.2 About this Document This non- proprietary Cryptographic Module Security Policy for the Java Cryptographic Module (Version 1.0) from Symantec provides an overview of the product and a high- level description of how it meets the security requirements of FIPS 140- 2. This document contains details on the module’s cryptographic keys and critical security parameters. This Security Policy concludes with instructions and guidance on running the module in a FIPS 140- 2 mode of operation. The Symantec Java Cryptographic Module (Version 1.0) may also be referred to as the “module” in this document. 1.3 External Resources The Symantec website (http://www.symantec.com) contains information on Symantec products. The Cryptographic Module Validation Program website (http://csrc.nist.gov/groups/STM/cmvp/documents/140- 1/1401val2011.htm) contains links to the FIPS 140- 2 certificate and Symantec contact information. 1.4 Notices This document may be freely reproduced and distributed in its entirety without modification. 1.5 Acronyms The following table defines acronyms found in this document: Document Version 1.1 © Symantec Corporation Page 5 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Acronym Term AES Advanced Encryption Standard AIX Advanced Interactive eXecutive ANSI American National Standards Institute API Application Programming Interface CBC Cipher Block Chaining CCM Counter with CBC- MAC CFB Cipher Feedback CMVP Cryptographic Module Validation Program CO Crypto Officer CSEC Communications Security Establishment Canada CSP Critical Security Parameter CTR Counter DES Data Encryption Standard DESX Data Encryption Standard XORed DH Diffie- Hellman DLP Data Loss Prevention DMZ Demilitarized Zone DRBG Deterministic Random Bit Generator DSA Digital Signature Algorithm EC Elliptic Curve ECB Electronic Code Book ECC Elliptic Curve Cryptography ECDH Elliptic Curve Diffie- Hellman ECDRBG Elliptic Curve Deterministic Random Bit Generator ECDSA Elliptic Curve Digital Signature Algorithm ECIES Elliptic Curve Integrated Encryption System EMC Electromagnetic Compatibility EMI Electromagnetic Interference FCC Federal Communications Commission FIPS Federal Information Processing Standard FTP File Transfer Protocol GCM Galois/Counter Mode GPC General Purpose Computer GUI Graphical User Interface HMAC (Keyed- ) Hash Message Authentication Code HP Hewlett- Packard HTTP Hypertext Transfer Protocol Document Version 1.1 © Symantec Corporation Page 6 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) HTTPS Secure Hypertext Transfer Protocol IBM International Business Machine JAR Java Archive JRE Java Runtime Environment JVM Java Virtual Machine KAT Known Answer Test LAN Local Area Network MAC Message Authentication Code MD Message Digest MTA Mail Transfer Agent NIS Network Information Service NIST National Institute of Standards and Technology OEAP Optimal Asymmetric Encryption Padding OFB Output Feedback OS Operating System PBE Password Based Encryption PKCS Public- Key Cryptography Standards PRNG Pseudo Random Number Generator PSS Probabilistic Signature Scheme RC Rivest Cipher RACE Research and Development in Advanced Communications Technologies in Europe RIPEMD RACE Integrity Primitives Evaluation Message Digest RNG Random Number Generator RSA Rivest, Shamir, and Adleman SHA Secure Hash Algorithm SMTP Simple Mail Transfer Protocol SP Special Publication SSL Secure Sockets Layer TDEA Triple Data Encryption Algorithm TDES Triple Data Encryption Algorithm TLS Transport Layer Security USB Universal Serial Bus Table 1 – Acronyms and Terms Document Version 1.1 © Symantec Corporation Page 7 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) 2 Symantec Java Cryptographic Module (Version 1.0) 2.1 Cryptographic Module Specification The module is the Symantec Java Cryptographic Module (Version 1.0), which is a software shared library that provides cryptographic services required by Symantec’s line of software products. The module is a software- only module installed on a multi- chip standalone device, such as a General Purpose Computer running a General Purpose Operating System. All operations of the module occur via calls from the Symantec applications and their respective internal daemons/processes. As such there are no untrusted services calling the services of the module, as APIs are not exposed. 2.1.1 Validation Level Detail The following table lists the level of validation for each area in FIPS 140- 2: FIPS 140- 2 Section Title Validation Level Cryptographic Module Specification 1 Cryptographic Module Ports and Interfaces 1 Roles, Services, and Authentication 1 Finite State Model 1 Physical Security N/A Operational Environment 1 Cryptographic Key Management 1 Electromagnetic Interference / Electromagnetic Compatibility 1 Self- Tests 1 Design Assurance 1 Mitigation of Other Attacks 1 Table 2 – Validation Level by DTR Section 2.1.2 Approved Cryptographic Algorithms The module’s cryptographic algorithm implementations have received the following certificate numbers from the Cryptographic Algorithm Validation Program: Document Version 1.1 © Symantec Corporation Page 8 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Algorithm CAVP Certificate AES – ECB, CBC, OFB- 128, CFB- 128 bit mode for 128, 192, 669 and 256 bit key sizes AES CCM 669 AES CTR 669 Diffie- Hellman Non- Approved (Allowed in FIPS mode) DSA 251 ECDRBG Vendor Affirmed: SP 800- 90 ECDSA, ECDSA- SHA1 72 FIPS 186- 2 PRNG (Change Notice 1 – with and without the 389 mod q step) HMAC DRBG Vendor Affirmed: SP 800- 90 HMAC- SHA- 1, HMAC- SHA- 224, HMAC- SHA- 256, HMAC- 353 SHA- 384, HMAC- SHA- 512 RSA X9.31, PKCS#1 v1.5, PKCS#1 v2.1 (SHA256 – PSS) 311 SHA- 1, SHA- 224, SHA- 256, SHA- 384, SHA- 512 702 TDES – ECB, CBC, CFB- 64, OFB- 64 mode 614 X9.82 Dual ECDRBG Vendor Affirmed: SP 800- 90 1 Table 3 – FIPS- Approved Algorithm Certificates 2.1.3 Non- Approved Cryptographic Algorithms The module does not implement any non- approved algorithms in FIPS mode. The module utilizes the following non- FIPS- approved algorithm implementations that are only allowed in a non- Approved mode of operation: • DES • RC2 block cipher DESX RC4 stream cipher • • ECAES RC5 block cipher • • AES- GCM PBE with SHA1 and Triple- DES • • Diffie- Hellman RSA OAEP for key transport • • EC- Diffie- Hellman Raw RSA encryption and decryption • • RSA encrypt/decrypt (Allowed in FIPS • 1 Note this implementation has received FIPS 140- 2 Level 1 validation 1048: http://csrc.nist.gov/groups/STM/cmvp/documents/140- 1/1401val2008.htm#1048 Document Version 1.1 © Symantec Corporation Page 9 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) mode for key transport) EC- Diffie- Hellman with Cofactor • RSA Keypair Generation MultiPrime (two ECIES • • or three primes) MD2 • RIPEMD160 • MD5 • HMAC- MD5 • PBE • Random Number Generators (ANSI X9.31, • MD5Random, and SHA1Random) 2.2 Module Interfaces The figure below shows the module’s physical and logical block diagram: Figure 1 – Module Boundary and Interfaces Diagram The interfaces (ports) for the physical boundary include the computer keyboard port, CDROM drive, floppy disk, mouse, network port, parallel port, USB ports, monitor port and power plug. When operational, the module does not transmit any information across these physical ports because it is a Document Version 1.1 © Symantec Corporation Page 10 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) software cryptographic module. Therefore, the module’s interfaces are purely logical and are provided through the Application Programming Interface (API) that a calling daemon can operate. The logical interfaces expose services that applications directly call, and the API provides functions that may be called by a referencing application (see Section 2.3 – Roles, Services, and Authentication for the list of available functions). The module distinguishes between logical interfaces by logically separating the information according to the defined API. The API provided by the module is mapped onto the FIPS 140- 2 logical interfaces: data input, data output, control input, and status output. Each of the FIPS 140- 2 logical interfaces relates to the module's callable interface, as follows: FIPS 140- 2 Interface Logical Interface Module Physical Interface Data Input USB ports, network ports, serial Input parameters of API function ports, SCSI/SATA ports, DVD, audio calls Ports Data Output Display (e.g. VGA, HDMI, DVI, etc.), Output parameters of API function USB ports, network ports, serial calls ports, SCSI/SATA ports, audio ports, DVD Control Input USB ports, network ports, serial API function calls ports, power switch Status Output Display, serial ports, network ports For FIPS mode, function calls returning status information and return codes provided by API function calls. Power None Power supply/connector Table 4 – Logical Interface / Physical Interface Mapping As shown in Figure 1 – Module Boundary and Interfaces Diagram and Table 5 – Module Services and Descriptions, the output data path is provided by the data interfaces and is logically disconnected from processes performing key generation or zeroization. No key information will be output through the data output interface when the module zeroizes keys. 2.3 Roles, Services, and Authentication The module supports a Crypto Officer and a User role. The module does not support a Maintenance role. 2.3.1 Operator Services and Descriptions The services available to the User and Crypto Officer roles in the module are as follows: Document Version 1.1 © Symantec Corporation Page 11 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Service Roles Input Output Key/CSP Access On Demand Self- Crypto None Status None test Officer Get FIPS140 User None Status None Context Get seeder User None Seed None generator Get Default User None Random None Random Number Number Generator Generator Check FIPS 140- 2 User None Status None Compliance Get State User None Status None Get Mode User None Status None Set Mode User API call parameter Status None Get Role User None Status None Set Role User API call parameter Status None Check Latest Self- User None Status None Test Results Check Mode User None Status None Configure CRNG User API call parameter None None Disable library User API call parameter None None Verify DSA User API call parameter Status None Parameters Encryption User API call parameters, Status, AES Key key, plaintext ciphertext TDES Key Decryption User API call parameters, Status, AES Key key, ciphertext plaintext TDES Key Digital Signature User API call parameters, Status, RSA Private Key Generation key, message signature RSA Public Key DSA Private Key DSA Public Key Digital Signature User API call parameters, Status RSA Private Key Verification key, signature, RSA Public Key message DSA Private Key DSA Public Key Key Establishment User API call parameters, Status, RSA Private Key Primitives key key RSA Public Key DH Key ECDH Key Document Version 1.1 © Symantec Corporation Page 12 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Service Roles Input Output Key/CSP Access Key Generation User API call parameters Status, AES Key key/key TDES Key pair DSA Private Key DSA Public Key RSA Private Key RSA Public Key DH Key HMAC DRBG Key HMAC with SHA- 1 and SHA- 2 Keys HMAC DRBG Key MAC User API call parameters Status, HMAC with SHA- 1 and SHA- 2 Keys key, message hash Hashing User API call parameters, Status, None message hash Random Number User API call parameters Status, FIPS 186- 2 PRNG Seed Generation random FIPS 186- 2 PRNG Seed Key bits EC DRBG Entropy EC DRBG S Value (Seed Length) EC DRBG init_seed HMAC DRBG Entropy HMAC DRBG V Value (Seed Length) HMAC DRBG Key HMAC DRBG init_seed Zeroization User API call parameters Status All Table 5 – Module Services and Descriptions 2.3.2 Operator Authentication As required by FIPS 140- 2, there are two roles (a Crypto Officer role and User role) in the module that operators may assume. As allowed by Level 1, the module does not support authentication to access services. 2.4 Physical Security This section of requirements does not apply to this module. The module is a software- only module and does not implement any physical security mechanisms. 2.5 Operational Environment The module operates on a general purpose computer (GPC) running on a modern version of Microsoft Windows as a general purpose operating system (GPOS). For FIPS purposes, the module is running on Microsoft Windows in single user mode and does not require any additional configuration to meet the FIPS requirements. Document Version 1.1 © Symantec Corporation Page 13 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) The module was tested on the following platforms: Microsoft Windows XP SP2 (32- bit) with Sun JRE 1.4.2 • Microsoft Windows XP SP2 (32- bit) with Sun JRE 1.5 • Microsoft Windows XP SP2 (32- bit) with Sun JRE 1.6. • The GPC(s) used during testing met Federal Communications Commission (FCC) FCC Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) requirements for business use as defined by 47 Code of Federal Regulations, Part15, Subpart B. FIPS 140- 2 validation compliance is maintained when the module is operated on other versions of the Microsoft Windows GPOS running in single user mode, assuming that the requirements outlined in NIST IG G.5 are met. Document Version 1.1 © Symantec Corporation Page 14 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) 2.6 Cryptographic Key Management The table below provides a complete list of Critical Security Parameters used within the module: Storage Storage Input Output Keys and CSPs Zeroization Access Locations Method Method Method AES Key RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle parameter U: RWD TDES Key RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle parameter U: RWD HMAC with SHA- RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle 1 and SHA- 2 Keys parameter U: RWD ECDH Key RAM Plaintext Internally API call CO: RWD clearSensitiveData() parameter power cycle generated U: RWD DH Key RAM Plaintext Internally API call CO: RWD clearSensitiveData() parameter power cycle generated U: RWD RSA Private Key RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle parameter U: RWD RSA Public Key RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle parameter U: RWD DSA Private Key RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle parameter U: RWD DSA Public Key RAM Plaintext API call None CO: RWD clearSensitiveData() power cycle parameter U: RWD FIPS 186- 2 PRNG RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle Seed generated U: RWD FIPS 186- 2 PRNG RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle Seed Key generated U: RWD EC DRBG Entropy RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle generated U: RWD EC DRBG S Value RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle (Seed Length) generated U: RWD Document Version 1.1 © Symantec Corporation Page 15 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Storage Storage Input Output Keys and CSPs Zeroization Access Locations Method Method Method EC DRBG RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle init_seed generated U: RWD HMAC DRBG RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle Entropy generated U: RWD HMAC DRBG V RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle Value (Seed generated Length) U: RWD HMAC DRBG Key RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle generated U: RWD HMAC DRBG RAM Plaintext Internally None CO: RWD clearSensitiveData() power cycle init_seed generated U: RWD R = Read W = Write D = Delete Table 6 – Module Keys/CSPs 2.6.1 Key Generation The module supports the generation of the DSA, RSA, and Diffie- Hellman (DH) and ECC public and Private Keys. The module also uses a Federal Information processing Standard 186- 2, Digital Signature Standard (FIPS 186- 2) Approved random number generator and a FIPS Approved Dual Elliptic Curve Deterministic Random Bit Generator (ECDRBG SP 800- 90) for generating asymmetric and symmetric keys. 2.6.2 Key Entry, Output, and Protection All keys and CSPs reside on memory internally allocated by the module and can only be output using the exposed APIs. The module does not support key entry or output from the physical boundary. The operating system and the JRE protect the memory and process space from unauthorized access. 2.6.3 Key/CSP Storage and Zeroization The module does not provide long- term cryptographic key storage. Storage of keys is the responsibility of the user of the module. All keys and CSPs are automatically zeroized by the module at the end of their lifetime. The user can ensure destruction of sensitive data by calling clearSensitiveData(). Powercycling the module will also zeroize keys. Document Version 1.1 © Symantec Corporation Page 16 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) 2.7 Self- Tests The module performs power- up and conditional self- tests to ensure proper operation. If a power- up self- test fails, the module is disabled and throws a SecurityException. The module can only leave the disabled state by restarting the Java Virtual Machine. If a conditional self- test fails, the module throws a SecurityException and aborts the operation. A conditional self- test failure does not disable the module. The following sections discuss the module’s self- tests in more detail. 2.7.1 Power- On Self- Tests The module implements the following power- on self- tests: TYPE DETAIL Software Integrity Check RSA Digital Signature Verification Known Answer Tests • AES • DES • ECDRBG • ECDSA • FIPS186 PRNG • HMAC DRBG • HMAC SHA- 1 • HMAC SHA- 224 • HMAC SHA- 256 • HMAC SHA- 384 • HMAC SHA- 512 • SHA- 1 • SHA- 224 • SHA- 256 • SHA- 384 • SHA- 512 • TDES Pair- wise Consistency Tests • DSA • ECDSA • RSA Table 7 – Power- On Self- Tests Power- on self- tests are executed automatically when the module is loaded into memory. 2.7.2 Conditional Self- Tests The module implements the following conditional self- tests: Document Version 1.1 © Symantec Corporation Page 17 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) TYPE DETAIL Pair- wise Consistency Tests • DSA • ECDSA • RSA Continuous RNG Tests Performed on all approved and non- approved RNGs Table 8 – Conditional Self- Tests 2.7.3 Critical Functions Tests The module implements the following critical functions tests: TYPE DETAIL Known Answer ECAES and ECIES when operating in FIPS140_ECC_MODE • Tests MD5 and HMAC- MD5 when operating in FIPS140_SSL_MODE • MD5, HMAC- MD5, ECAES, and ECIES when operating in • FIPS140_SSL_ECC_MODE Table 9 – Critical Functions Tests 2.8 Mitigation of Other Attacks As a defense against timing attacks, RSA key operations implement blinding by default. By using the blinding method, it is ensured that the decryption time is not correlated to the input ciphertext; as a consequence, attempts of timing attacks are thwarted. Blinding is implemented through blinding modes with the following available options: Blinding mode off • Blinding mode with no update (the blinding value is squared for each operation) • Blinding mode with full update (a new blinding value is used for each operation). • Document Version 1.1 © Symantec Corporation Page 18 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) 3 Guidance and Secure Operation This section describes how to configure the module for FIPS- approved mode of operation. Operating the module without maintaining the following settings will remove the module from the FIPS- approved mode of operation. 3.1 Initial Setup The Symantec cryptographic module wrapper fully initializes and manages FIPS mode. This includes performing an integrity check, verifying the provider is configured, performing the provider self tests, and reporting status. When the module is loaded by the host application, the FIPSModeManager.startFIPSMode() function is called to initialize the module in a FIPS- approved mode of operation. This function checks the integrity of the module, runs all power- up self- tests, and, if successful, sets the module in the FIPS140_SSL_MODE by default. The initialization function records the following message to a log file: System running in FIPS 140 mode. The module uses JAR- signing to check the integrity of the module (the consuming application provides the signing certificate for the JARs of the module). Upon failure of either the software integrity test or any of the self- tests, the function throws an exception as status output and disables the library. Additionally, the module logs the following message: FIPS initialization failed, FIPS cryptographic services disabled 3.2 Crypto Officer Guidance 3.2.1 Software Packaging and OS Requirements The module must be installed on a General Purpose Operating System running in single user mode. To configure single- user mode, the following must be disabled: Remote registry and remote desktop services • Remote assistance • Guest accounts • Server and terminal services • Contact Microsoft support for configuration details; specific configuration steps are beyond the scope of this document. Document Version 1.1 © Symantec Corporation Page 19 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) 3.2.2 Enabling FIPS Mode No specific configuration is required to enforce FIPS mode beyond the FIPSModeManager.startFIPSMode() function. Status can be verified by calling the FIPSModeManager.isInFIPS140Mode() function, which returns true if the module is in a FIPS- Approved mode and false if in a non- Approved mode. 3.2.3 Management Procedures The Crypto Officer can run the self- tests at any time by calling the runSelfTests() function. 3.2.4 Additional Rules of Operation 1. All host system components that can contain sensitive cryptographic data (main memory, system bus, disk storage) must be located in a secure environment. 2. The writable memory areas of the Module (data and stack segments) are accessible only by the calling application so that the Module is in "single user" mode, i.e. only the calling application has access to that instance of the Module. 3. The operating system is responsible for multitasking operations so that other processes cannot access the address space of the process containing the Module. 3.3 User Guidance 3.3.1 General Guidance In order to use the module in FIPS 140 mode of operation, the User must only use the approved algorithms as listed in Table 3 – FIPS- Approved Algorithm Certificates. The requirements for using the approved algorithms in a FIPS 140 mode of operation are as follows: The bit- length for a DSA key pair must be 1024 bits. • Random Number Generators must be seeded with values of at least 160 bits in length. • HMAC- DRBG random data requests must be less than 219 bits in length. • Bit lengths for an RSA key pair must be between 1024 and 4096 bits in multiples of 512. When • used for transporting keys and using the minimum allowed modulus size, the minimum strength of encryption provided is 80 bits. Bit lengths for the Diffie- Hellman key agreement must be between 1024 and 2048 bits, which • provides between 80 bits and 112 bits of encryption strength. Using the minimum allowed modulus size, the minimum strength of encryption provided is 80 bits. Bit lengths for an HMAC key must be one half of the block size. • Document Version 1.1 © Symantec Corporation Page 20 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) If RSA key generation is requested in FIPS140 mode, the toolkit always uses the • FIPS140- approved RSA X9.31 key generation procedure. Key wrapping methodology provides between 80 and 150 bits of encryption strength. EC key pairs must have domain parameters from the set of NIST- recommended named curves • (P192, P224, P256, P384, P521, B163, B233, B283, B409, B571, K163, K233, K283, K409, and K571). The domain parameters can be specified by name or can be explicitly defined. The module limits possible curves for Dual EC DRBG to P- 256, P- 384, and P- 521 in accordance with SP 800- 90. EC Diffie- Hellman primitives must use curve domain parameters from the set of • NIST- recommended named curves listed above. The domain parameters can be specified by name, or can be explicitly defined. When using the NIST- recommended curves, the computed Diffie- Hellman shared secret provides between 80 bits and 256 bits of encryption strength. When using an Approved RNG to generate keys, the RNGʹȃs requested security strength must be • at least as great as the security strength of the key being generated. Additionally, operators should take care to zeroize CSPs when they are no longer needed. 3.4 Role Changes If the operator needs to operate the module in different roles, then the operator must ensure that all instantiated cryptographic objects are destroyed before changing from the Crypto User role to the Crypto Officer role, or unexpected results could occur. 3.5 Embedded Module Modes of Operation The module supports five modes of operation: FIPS140_MODE • FIPS140_SSL_MODE • NON_FIPS140_MODE • FIPS140_ECC_MODE • FIPS_SSL_ECC_MODE • The following table lists the values that can be used in the setMode() method to change the mode of operation, and the algorithms available in that mode. Document Version 1.1 © Symantec Corporation Page 21 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Value in setMode() Available Algorithms FIPS140_MODE Provides all cryptographic algorithms listed in Table 3 – FIPS- Approved Algorithm Certificates. The default FIPS 140- 2 approved random number generator is the FIPS 186- 2 PRNG. FIPS140_SSL_MODE Provides all cryptographic algorithms listed in Table 3 – FIPS- Approved Algorithm Certificates plus MD5 and FIPS 140- 2 approved if used HMAC- MD5. with TLS protocol implementations This mode can be used in the context of the key establishment phase in the TLSv1, TLSv1.1 and TLSv1.2 This is the default mode for the protocols. For more information, see section 7.1 Symantec Java Cryptographic Acceptable Key Establishment Protocols in Module (Version 1.0). Implementation Guidance for FIPS PUB 140- 2 and the Cryptographic Module Validation Program. The implementation guidance disallows the use of the SSLv2 and SSLv3 versions. Cipher suites that include non- FIPS 140- 2- approved algorithms are unavailable. This mode allows implementations of the TLS protocol to operate the module in a FIPS 140- 2- compliant manner with the FIPS 186- 2 PRNG as the default. FIPS140_ECC_MODE Provides all available algorithms listed in Section 2.1.2 and Section 2.1.3. Not FIPS 140- 2 approved FIPS140_SSL_ECC_MODE Provides the same algorithms as FIPS140_MODE, plus ECAES and ECIES. The random number generator in this Not FIPS 140- 2 approved mode is the Dual ECDRBG. NON_FIPS140_MODE Provides the same algorithms as FIPS140_SSL_MODE, plus ECAES and ECIES. The random number generator Not FIPS 140- 2 approved in this mode is the Dual ECDRBG. The same restrictions with respect to protocol versions and cipher suites as in FIPS140_SSL_MODE apply. Table 10 – Values in setMode to Change the Mode of Operation Once the module is operating in a FIPS- Approved mode, the setMode() function can only be used to change to a non- FIPS Approved mode. In order to return to a FIPS- Approved mode, the library must be halted and then reloaded (by either calling the relevant services or power cycling). 3.6 Embedded Module Random Number Generator In FIPS 140- 2 modes, the module provides a default RNG. For the FIPS140_MODE and FIPS140_SSL_MODE, the module provides a FIPS 186- 2 Pseudo Random Number Generator (PRNG) and uses this PRNG internally by default in all operations that require the generation of random numbers. For FIPS140_ECC_MODE and FIPS140_SSL_ECC_MODE, the module implements an ECDRBG internally by default. Document Version 1.1 © Symantec Corporation Page 22 of 23 FIPS 140- 2 Non- Proprietary Security Policy: Symantec Java Cryptographic Module (Version 1.0) Operators in all modes (Approved or non- Approved) can select either the FIPS 186- 2, ECDRBG or HMAC DRBG when creating a RNG object and setting this object against the operation requiring random number generation (for example key generation). However, whenever DSA is used, the RNG used internally will always be the FIPS 186- 2 Change Notice 1 Option 1 with mod Q PRNG. Document Version 1.1 © Symantec Corporation Page 23 of 23