s Validation C The National Institute of Standards The Communications Security and Technology of the United States Establishment of the Government of America of Canada Certificate No. 1006 The National Institute of Standards and Technology, as the United States FIPS 140-2 Cryptographic Module Validation Authority; and the Communications Security Establishment, as the Canadian FIPS 140-2 Cryptographic Module Validation Authority; hereby validate the FI PS 140-2 testing results of the Cryptographic Module identified as: Windows Server 2008 Code Integrity (ci.dll) by Microsoft Corporation ,(When operated in FIPS mode with Winload OS Loader (winload.exe) validated to FIPS 140 2 under Cert. #1005 4 operating in flPS mode) in accordance with the Derived Test Requirements for FIPS 140-2, Security Requirements for Cryptographic Modules. FIPS 140-2 specifies the security requirements that are to be satisfied by a cryptographic module utilized within a security system protecting Sensitive Information (United States) or Protected Information (Canada) within computer and telecommunications systems (including voice systems). Products which use the above identified cryptographic module may be labeled as complying with the requirements of FIPS 140-2 so long as the product, throughout its life cycle, continues to use the validated version of the cryptographic module as specified in this certificate. The validation report contains additional details concerning test results. No reliability test has been performed and no warranty of the products by both agencies is either expressed or implied. This certificate includes details on the scope of conformance and validation authority signatures on the reverse. TM: A Certification Mark 01 NIST, which does not Imply product endorsement by NIST, the U.S., or Canadian Government!;. FIPS 140-2 provides four increasing, qualitative levels of security: Level 1, Level 2, Level 3, and Level 4. These levels are intended to cover the wide range and potential applications and environments in which cryptographic modules may be employed. The security requirements cover eleven areas related to the secure design and implementation of a cryptographic module. The scope of conformance achieved by the cryptographic modules as tested in the product identified as: Windows Sewer 2008 Code Integrity (cLdll) by Microsoft Corp.oratlon (Software Version: 6.0.6001.18000; Software) Allan Laboralo,rles. NVLAP Lab Code 200492-0 and tested by the Cryptographic Module Testing accredited laboratory: CRYPTIK Version 7.0 is as follows: ------------------------- Cryptographic Module Specification: Level 1 Cryptographic Module Ports and Interfaces: Level 1 Roles, Services, and Authentication: Level Finite State Model: Level 1 Physical Security: Level NJA Cryptographic Key Management: Level 1 (Multi-Chip Standalone) EMlfEMC: Level 1 S elf-Tests: Level 1 Design Assurance: Level 1 Mitigation of Other Attacks: Level N/A Operational Environment: Level 1 tested in the following configuration(s): Microsoft Windows Server 2008 (x86 Version); Microsoft Windows Server 2008 (x64 version); Microsoft Windows Server 2008 (IA64 version) (single-user mode) The following FIPS approved Cryptographic Algorithms are used: RSA (Cert. #355}; SHS (Cert. #753) The cryptographic module also contains the following non-FIPS approved algorithms: MD5 Overall Level chieved: 1 Signed on behalf of the Government of the United States Signed on behalf of the Government of Canada Signature: ,.~ . -< (V" , . Signature: Cz~ ~ < lS =:s Dated: T I "' "1" . ~. · r Dated: f\..; O.h~+ l d. ~. r dvW t Chief, ComputerLSecurity Division Director, Industry Program Group National Institute of Standards and Technology Communications Security Establishment Canada